View Full Version : valve clearance for 230cc 169FMM OHC Hondoid?
zingshoen
03-26-2013, 08:19 AM
would anyone know the valve clearances for the 230 cc aka "250cc" 169FMM OHC Engine?
Weldangrind
03-26-2013, 12:55 PM
Is that a pushrod motor? If so, the specs are here: http://hondacg125.awardspace.com/valve_clearance.htm
humanbeing
03-26-2013, 08:25 PM
According to Honda dealer in Japan http://www.ride-inc.net/file/32/data.pdf
MD33 (65.5mm x 66.2 mm) IN/EX = 0.1mm
zingshoen
03-26-2013, 08:30 PM
weld, it is an OHC motor, no pushrods.
thank you human being, for looking it up, that should be right according to the bore.
that is an impressive chart 8O
zingshoen
03-28-2013, 09:17 AM
this also may be a helpful valve tutorial for the CRF230 style engine:
http://codewins.com/motorcycles/crf230valveclearance/
btw: a manual for the CRF230 i found here
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CRF230F-02.pdf
(credit for the link goes to commander jesus at thumpertalk)
Weldangrind
03-28-2013, 01:27 PM
Excellent tutorial! I have a 200cc Roketa version, and I'm grateful for the specs and pics.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.