View Full Version : ZS 250 GS rear sprocket
tobyb
04-06-2013, 07:55 AM
Hi,
anybody know what honda or other rear sprockets will be compatible with the zongshen 250 gs maxim?
I need to go a smaller size as the standard one has the bike over reving at any more than 80km/h.
thanks
Toby
katoranger
04-06-2013, 08:05 AM
Welcome toby.
Do you have a picture of the sprocket? I am not too familiar with your bike. Most of us have the dual sports.
Weldangrind
04-06-2013, 12:03 PM
Also, can you increase the front sprocket size instead? Much easier / cheaper.
tobyb
04-08-2013, 06:21 AM
Thanks for replies.
No room to put bigger front sprocket.
Picture of rear sprocket attached
Not sure how to attach image!
tobyb
04-08-2013, 06:27 AM
/home/toby/Desktop/sprocket.JPG
tobyb
04-08-2013, 06:31 AM
2nd attemp
file:///home/toby/Desktop/sprocket.JPG
katoranger
04-08-2013, 08:19 AM
Try following these steps for posting pictures. You need to use a outside hosting site like photobucket.
http://chinariders.net/modules.php?name=Forums&file=viewtopic&t=11188
SpudRider
04-08-2013, 03:16 PM
We also need to know three measurements from your rear sprocket, as shown in the diagram below. ;)
http://www.jtsprockets.com/fileadmin/code/images/large/jtr269.jpg
Spud :)
matasar
07-11-2013, 05:11 PM
buy anything and take it to an lathe worker. takes 10 min to fix center hole and you can drill new holes by youself.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.