carb problem

[freekshow]

07 200cc enduro roketa have moved the c-clip down to next to last slot (bone stock 30 miles) 2 turns out on fuel mixture seems to be running rich with fuel smell and smoke from exhaust also stumbles on low end acceleration. i made these changes because it took forever to warm up and then would not idle right help!! i know there are other posts about this but not exactly my situation

[katoranger]

Have you tried to turn the fuel screw back in some? About 1 3/4 turns maybe?

Allen

[freekshow]

thx allen but i think i got it that curly q clip was installed wrong from the factory looked at picture on another post and figured that out we"ll see how it does now when it is cold

[katoranger]

No problem. I am not a carb expert.

Allen

[red2003]

You have made the right adjustments. It should start better and idle better cold now with the clip down and the fuel screw at 2 turns out. You gotta get some miles on it before it'll run smooth. It took mine a good 500 miles to fully break in. Give it time.

[madmaximum]

I'm gonna have to chime in here. I have a one size over main jet, with the airbox & exhaust drilled, & I think my screw is 3/4 to 1 turn out. 2 turns made mine blubbery rich up to half throttle. You'll have to experiment with your settings to see what works best for you.

[freekshow]

thx everybody for the info im new here