2006 Vento 200c Parts?

[Florider]

I recently purchased this bike. I am happy with it so far although it has randomly stalled on me a few times. I know the intake manifold needs to replaced there was a crack in it which I epoxied but not sure how well or how long it will work. I need to find some front brake pads and a couple of the plastic ferrings for the bike. Anyone with some helpful info on parts location or bike that cross references with it wold be great. I would also like to replace the headlight with a brighter one as the low beam does basically nothing. Thanks in advance for the help.

[edtardo]

could you post some pics? that would help to identify your bike and allow us to help source parts. A quick google search yielded this, which looks a lot like a zong.

http://www.motorcycle.com/specs/vento/on-off-road/2006/mountrack/base.html

[SpudRider]

Please do post some photographs of your bike so we can identify it. :)

[Florider]

Here are some pics. Sorry for the delay, work, school and pregnant girlfriend319

320

321

[oviking99]

Same bike as mine. Look here.
http://www.chinariders.net/showthread.php?t=12856

[SpudRider]

The photos are a bit difficult to view, but I believe you own a Zongshen 200GY-2. I own the same motorcycle. :)

You might enjoy reading the threads in the "Zong Sticky," located at the top of the Dual Sport Forum. ;)

http://www.chinariders.net/showthread.php?t=6051

You can buy the parts you need from either Zongshen America, or directly from the Taobao website in China. :)

[Weldangrind]

I like the 45 degree pod filter. Does it run ok?

[Florider]

Bike runs fine with pod filter but it caused a problem with the already split intake manifold. I have since secured it so it doesn't vibrate so much. I need to locate another manifold any ideas on where to look?

[SpudRider]

Bike runs fine with pod filter but it caused a problem with the already split intake manifold. I have since secured it so it doesn't vibrate so much. I need to locate another manifold any ideas on where to look?
You can get a carburetor intake manifold from Zongshen America, or Taobao. If you prefer, you can also get another air box.

[Florider]

I tried the taobao website but it is in Chinese and I can't read it. There were some agents but I don't trust that and I still have no way of ordering. I also tried the Zongshen America site but found no parts. I did email zonshen this afternoon. Thanks your help. I did find some parts for the tw200 that look like they match up.

[SpudRider]

I tried the taobao website but it is in Chinese and I can't read it. There were some agents but I don't trust that and I still have no way of ordering. I also tried the Zongshen America site but found no parts. I did email zonshen this afternoon. Thanks your help. I did find some parts for the tw200 that look like they match up.
I use the Google Chrome web browser, and it will translate Chinese to English. ;) The TBTrends agent is reliable, helpful, and honest. Several members here, including myself, have been satisfied customers of TBTrends.

Indeed, you need to contact Zongshen America by telephone or email; you won't find any parts listed on its website. :ohno: If you live near Miami, I encourage you to visit the Zongshen America headquarters; you will get much better service in person. ;)

[culcune]

The photos are a bit difficult to view, but I believe you own a Zongshen 200GY-2. I own the same motorcycle. :)

This bike is the same as the 200GY-2. Qlink and Vento, as well as Zongshen, sold the same bike back in '05 or '06.

[bogieboy]

If you have the standard rubber intake i found wrapping it with electrical tape is a good temporary fix, i wouldnt advise it as a permanant fix, but it solved my idle issues and stalling issues for now... Just a hought...LOL its a cheap and easy fix...

[Weldangrind]

I bought a ton of Zong parts for my TW200 on Taobao through Tbtrends.com

[Florider]

SO glad I found your site, lots of helpful people and info. I live 2.5 hours North of Miami and may go take a look at the plant. I'm looking for some of the plastics covers if anyone has any they want to sell.
:thanks:

[SpudRider]

You can also get the plastic/ABS side covers for cheap at Taobao. ;)

[Florider]

Does anyone know if I can put a set of brake calipers from a Yamaha tw200 on this bike. I would like to use them instead of the little round brake pads because they are easier to get

[SpudRider]

Does anyone know if I can put a set of brake calipers from a Yamaha tw200 on this bike. I would like to use them instead of the little round brake pads because they are easier to get
No, a TW200 brake caliper will not work. :ohno: However, the round brake pads last a very long time. I am still using the original brake pads in my Zong, and they still have a lot of life left in them after riding almost 60,000 miles. :tup: You can get the round brakes pads for cheap from a variety of vendors. ;)

http://www.chinariders.net/showthread.php?t=4585

[humanbeing]

Does anyone know if I can put a set of brake calipers from a Yamaha tw200 on this bike. I would like to use them instead of the little round brake pads because they are easier to get
http://www.chinariders.net/showthread.php?t=8845