carb question

[DatzMrPig]

So i just traded into a KPX Z200 that was running until the throttle cable broke.the cable and carb has been change and now it won't start.I've owned a few dirt bikes but never a chineeseone so I figure I would ask the experts their opinions on it.

[Weldangrind]

Welcome!

Let's start with the basics. Do you have spark?

[DatzMrPig]

i have compression and a nice blue spark.I'm thinking its the new carb like i said ran till it was changed maybe need to tune the new one

[DatzMrPig]

i tryed today to roll start it(tired of trying to kick)it sounds like its tryin to start but nothing.Smells like gas to so i'm thinking its flooding out

[Weldangrind]

Have you pulled the carb apart to check the jets? Maybe one is clogged with debris.

[DatzMrPig]

i plan on it today i hope that since its new its cklean and just the needles are outta whack.

[DatzMrPig]

So i took the carb apart it was clean as a whistle.turns out the clip was all the way down i put it on the 3rd spot and set my low speed to 2 turns out and she fired right up.Road around for about 30 mins then died now i have no spark.Joy.so i've changed the coil and plug still nothing.Man I love chasing gremlins..lol

[DatzMrPig]

OK so I tried the cdi trick of unhooking the kill switch wire and it fired right up the only thing is it doesn't actually have a kill switch just an on off ignition switch but it looked fine.I'm not sure if it has other safety switches,neutral,clutch any of those but i know that trick bypasses all of them.