Tach cluster for Bashan Storm 250...

[mjstef]

I have received a lot of PM's on the fitment for this bike. I am really short on time this time of year but would help someone see if this would fit it as well. I really should just order a storm but i have a LOT of $$$$ lying out there with my regular business and hate being cash poor. Anyways if someone would take some pics for me of these areas:

1. Original cluster on bike.

2. Cluster removed showing mounting bracket.

3. The 2 sets of wires coming out of the left side of the motor by the front sprocket as well as the plugs on them.

4. Left side of bike with seat removed.

With this i can start looking into the wiring further. Thanks!!!!!

[dpl096]

I dont have one .... YET ! .... Hey BARLOW ..... wanna shoot him some pix ?

[BARLOW]

I have received a lot of PM's on the fitment for this bike. I am really short on time this time of year but would help someone see if this would fit it as well. I really should just order a storm but i have a LOT of $$$$ lying out there with my regular business and hate being cash poor. Anyways if someone would take some pics for me of these areas:

1. Original cluster on bike.

2. Cluster removed showing mounting bracket.

3. The 2 sets of wires coming out of the left side of the motor by the front sprocket as well as the plugs on them.

4. Left side of bike with seat removed.

With this i can start looking into the wiring further. Thanks!!!!!
although i dont have $100 to spend on one, i will try to get the pics you need later today or tomorrow ... then you other storm guys and gals can buy me one for my birthday ... :lmao:

[Sport Rider]

although i dont have $100 to spend on one, i will try to get the pics you need later today or tomorrow ... then you other storm guys and gals can buy me one for my birthday ... :lmao:

where do I get in line for this one? :clap::hi::hehe::doh:

[dpl096]

where do I get in line for this one? :clap::hi::hehe::doh:

and the line gets deeper ! LMAO ......now serving 97 ...97 .....

[BARLOW]

first ones (not so sure it will work) and it seems a lot different than the diagram in my book 5396

5397

5398

5399

5400

[BARLOW]

last ones ... i seem to only have the 1 set of wires from the case though 5401

5402

[mjstef]

So from what i can see, The Storm only has 1 set of wires coming from the engine.The Green/Red Stripe SHOULD be the Neutral wire. If you get a chance, unplug it to verify. The Neutral wire on the hawk is in it's own plug. This would mean the Storm DOES NOT have the gear position switch installed in the transmission but rather just a Neutral switch. In that case, This cluster would not have the gear position shown but everything else could be wired in.

[BlackBike]

also, you probably realize this, no fuel sending unit either on bashan's for fuel level indicator (like my new title says MAKE: BASH :lmao: texas dmv is clueless:lmao:)

[culcune]

The Bashan 'Shark' model seems to use a similar gauge to the ones you have if you look through the photos.

http://www.peacesports.com/newsite/product/bs250gy-18b/

So does the Brozz

http://www.peacesports.com/newsite/product/bs250gy-18c/

[BARLOW]

I am interested in one of these but have a question. Is it adjustable for wheel size. The Storms 200 and 250s have 19" front wheels.
he said it could be set for size

[BlackBike]

Mjst.... look what just popped up on another thread. I think you were looking for wire details for your console on the bashan.

http://store.oohla.com/storefiles/te...manual%202.pdf by mag00