06 vento mountrack 250cc

[Backroadrunner]

Hi everybody I need new parts for my bike I'm a new rider and picked up the bike for $700. Runs good but needs some work. Can anybody help with parts? Carburetor is brand new,would like new sprocket,brakes,exhaust, headlight aND really need new body plastic. Thanks everyone!
I'm also located in lv,nv

[hertz9753]

http://www.chinariders.net/search.php?searchid=405900

Searching is half of the fun. :)

[humanbeing]

Mabybe similar to http://www.chinariders.net/showthread.php?t=6051

[Pliskin]

It's 200cc.

[hect75]

HI, I got the same bike two years ago

http://i123.photobucket.com/albums/o303/hrmzga/Photo-0075_zpsa12020b5.jpg~original (http://s123.photobucket.com/user/hrmzga/media/Photo-0075_zpsa12020b5.jpg.html)

but know looks different although I haven´t ride for a long time.

http://i123.photobucket.com/albums/o303/hrmzga/Foto-0010_zpstxl0gjsd.jpg~original (http://s123.photobucket.com/user/hrmzga/media/Foto-0010_zpstxl0gjsd.jpg.html)

It´s a reliable bike and love riding on the highway. Spare parts are easy to get ´cause most of the parts are compatible with TW200.

Buena suerte con tu moto (good luck with your ride).

[zingshoen]

nice Zongshen-LZX200G. as hector says, TW200 is it s role model. not all parts fit, but if you look at the stickies in the dual sport section you ll find spud's extensive and detailed modification manuals with lots of info.
i run a mikuniVM28 flatslide on mine, very nice, but needs a bit of dialling in, a smaller air jet and a different needle and the right amount of air, a unifliter with a shroud or a modified airbox...

http://www.tw-parts.com/

these guys might give you ideas.

hey hector, this is a nice looking zong! why did you cut the seat? is that a different tank?

[Weldangrind]

That looks like an XT350 tank.

[hect75]

nice Zongshen-LZX200G. as hector says, TW200 is it s role model. not all parts fit, but if you look at the stickies in the dual sport section you ll find spud's extensive and detailed modification manuals with lots of info.
i run a mikuniVM28 flatslide on mine, very nice, but needs a bit of dialling in, a smaller air jet and a different needle and the right amount of air, a unifliter with a shroud or a modified airbox...

http://www.tw-parts.com/

these guys might give you ideas.

hey hector, this is a nice looking zong! why did you cut the seat? is that a different tank?

The seat didn´t fit the gas tank ´cause it´s way too big (12L) compared to stock gas tank (8L). I think it´s a honda gas tank ´cause the original color was red and shape are very similar (XL350). The front fender is Yamaha I found in a junk yard.