CSC TT250 Replacement Handlebars

[CDryder]

Looking for some new handlebars for the tt250, does anyone have any recomendations?

[Bruce's]

It really depends on what you want ,there are literally hundreds if not thousands of bends with different rises and angles ,asking us really will not help you ,you must try them for yourself .

[CDryder]

It really depends on what you want ,there are literally hundreds if not thousands of bends with different rises and angles ,asking us really will not help you ,you must try them for yourself .

Thanks for the input, I went to a couple of the bigger motorcycle stores in my area today but they had an incredibly small selection of handlebars. All of them were pretty low rise and since I'm 6' 3" I'd prefer something closer to the stock ones. I'm needing something soon and I'll probably have to order online so I had hoped to just get an idea of what people might be using.

[darmst6829]

If you like the bend of the bars but need some height Google "bar risers". I am the same height as you. Jury is out on this subject until I get some more bar time in.

[Bruce's]

Sorry ,I thought you didn't like what you had and wanted to know what everyone else was running .Since you like the originals ,find a renthal catalogue or a catalogue from one of the many others ,and measure up your bars and compare them with what's listed in the catalogue .Sorry I don't have a tt250 ,so I have no baseline to help you with ,but many stock dirt bikes run a honda cr bend ,a yz bend etc,so you might try looking at the usual suspects up first

[rojo_grande]

Rocky Mountain ATV has the Tusk aluminum bars at a pretty good price. See the size chart for different options for width, height and pull back. A few colors to choose from as well. Good reviews.

https://www.rockymountainatvmc.com/p/947/12330/Tusk-T-10-Aluminum-7-8%22-Handlebar?term=tusk+handlebar

Rojo

[CDryder]

I used Renthals website to figure out what type of bend I'm looking for, but In the end I bought a Pro Taper atv mid bar. If I need them any taller I'll look into risers. Thanks for the help!

[2LZ]

I put the 30mm Tusk risers on Mrs 2LZ TT250 and they turned out nice. Plenty of wiring and cabling. Not a problem. Got the bars up to a nice elevation too.

[Kingraider]

I know this is a super old post but I just installed the pro taper cr high bend bars and they are great! They come real close to the height of the stock bars

[Spork357]

Do the CR High bend give you enough clearance for all the controls? How do they feel when you are stand? I just ordered a set of Tusk CR High bends and they look a lot shorter than the stock bars. Took a gamble between them and the ATV Sport bars.

[TxTaoRider]

Some of the bars for "minis" are closer in width (usually 30.5" or narrower) to the stock bars. Personally I prefer a narrower than regular "mx" bars for trails and street. The mx bars are usually 30.5-34" wide which is good for manhandling a bike around a track, but they catch trees and stuff in the trails.