ballinparlay
09-30-2016, 06:32 PM
Here are a couple pictures of my hawk at about 90% completion. It was a heck of a time trying to find parts that work vs what doesn't so hopefully this helps.
New exhaust (same one recommended by Motocheez from Amazon/China)
K&N pod (unfortunately, see comments below)
Gel grips
Hella horn (Houston drivers....enough said)
LED headlight/tail light/turn signal
Rear fender delete (a must do, that thing was ridiculous)
Mikuni carb
Shinko tires
Digital gage cluster
Battery Tender battery
O-ring chain
45T rear sprocket
NGK plug
I had to go with the pod due to the quick melting of the air box from the 7000 degree exhaust, but it was surprisingly easy to tune even at mid and high throttle range. Probably because it's such a small bike. The other upgrades like the carb and tires made a huuuuge difference. I decided to powder coat some miscellaneous pieces as well to break up the monotony. Gonna do the rear grab bars next. Let me know what you think and holler if you have any questions, I'd love to help.
New exhaust (same one recommended by Motocheez from Amazon/China)
K&N pod (unfortunately, see comments below)
Gel grips
Hella horn (Houston drivers....enough said)
LED headlight/tail light/turn signal
Rear fender delete (a must do, that thing was ridiculous)
Mikuni carb
Shinko tires
Digital gage cluster
Battery Tender battery
O-ring chain
45T rear sprocket
NGK plug
I had to go with the pod due to the quick melting of the air box from the 7000 degree exhaust, but it was surprisingly easy to tune even at mid and high throttle range. Probably because it's such a small bike. The other upgrades like the carb and tires made a huuuuge difference. I decided to powder coat some miscellaneous pieces as well to break up the monotony. Gonna do the rear grab bars next. Let me know what you think and holler if you have any questions, I'd love to help.