Kid crashed Kart, need parts

[pistolclass]

So my son clipped fence post with his Monster Moto 80cc Kart doing about 20mph. It spun the Kart and bend the tie rod and the tie rod end. Anyone know where I can get these parts?

He is fine, I upgraded the seat belt to a 5 point harness because I know he will push this little kart.

I also welded a roll cage because it is only a matter of time before the kart is rolled.

[FLASHLIGHTBOY]

got any pics of the unit..

[FLASHLIGHTBOY]

this go kart is all over the place... lot s of sellers.... just google it... any taotao dealer like killer motors .. and such places.. this is the newest Chinese go kart from CHINA... to sell..

[dirtbkr188]

Maybe something from this page (https://www.vmcchineseparts.com/collections/tie-rods) will work for you

[FLASHLIGHTBOY]

just make sure you get the right thread... left hand or right hand thread... even the ones for kids atvs will fit.. just check the threads..

[pistolclass]

here are some pics, The spindle is bent too:

The last pic is the unbent side for reference.

[FLASHLIGHTBOY]

I think it is best to get the parts f rom a dealer who sell this brand and model... they are not ordinary atv parts.. these are for this model.. too bad..

[pistolclass]

yeah the dealer is Home Depot.

I can build something from gopowersports.com but was hoping to get exact replacement parts.

[BlackBike]

Can't you just bend everything back with a vice. Looks like you already bent that tab back. Straighten out that rod and your good? :shrug:

[pistolclass]

Yes I could bend everything back but If I had the option to just replace the parts I would rather do that.

The last picture is the undamaged side. It must be the camera angle because it is pretty bend still, I haven't touched it yet.

I'm hoping these parts are fairly cheap so if replacing them would be my preferred route.

[pistolclass]

I reached out to monstermoto.com and come to find out, they sell the parts. The prices are decent, too. Shipping was a little steep. Here is the breakout:

Shopping cart
Product image Description Quantity Price
90-10056-00 - BOLT, SOCKET HEAD ZINC (M8X30) 1 $0.50
60-10014-00 - AXLE, (SPINDLE) FRONT LEFT 1 $30.00
90-10071-00 - HEIM JOINT, TIE ROD END M8 LH THREAD1 $2.00
90-10051-00 - HEIM JOINT, TIE ROD END M8 RH THREAD1 $2.00
60-10015-00 - TIE ROD, STEERING 1 $3.60
Subtotal $38.10
Shipping $13.00
Total USD $51.10

I will followup when the parts come in.

[BlackBike]

I reached out to monstermoto.com and come to find out, they sell the parts. The prices are decent, too. Shipping was a little steep. Here is the breakout:

Shopping cart
Product image Description Quantity Price
90-10056-00 - BOLT, SOCKET HEAD ZINC (M8X30) 1 $0.50
60-10014-00 - AXLE, (SPINDLE) FRONT LEFT 1 $30.00
90-10071-00 - HEIM JOINT, TIE ROD END M8 LH THREAD1 $2.00
90-10051-00 - HEIM JOINT, TIE ROD END M8 RH THREAD1 $2.00
60-10015-00 - TIE ROD, STEERING 1 $3.60
Subtotal $38.10
Shipping $13.00
Total USD $51.10

I will followup when the parts come in.

http://s.quickmeme.com/img/13/130ac763a904034feaa9453afaf346c4f780461d65d8bc28a9 e3c9c1d68869c7.jpg

This was about the funniest he got to me. Never went wild about him like everyone did for a while.

[pistolclass]

Kids Kart is all back together. My boy did most of the wrenching. you crash it you wrench it.

Parts that I didn't get with my original order were the bearings that go inside the spindle. I cross referenced the numbers on the bearings and found out that they were just skate board bearings. So for $15 I got 8 of them at a local skate/bike shop.

BTW the bearings were dry! My son and I started to grease up the other bearings.