Shark 250

[Maggpyer]

Bashan. I thought, what...the...f*@k...is...that?! In my opinion, after 6000 thousand miles in 5 months, it’s the smartest move I’ve made in a looooong time. I have never owned a motorcycle or ridden one, other than a small Honda 70 a couple of times. I’m a veteran Jeeper but got out of that a few years back. I wanted something with decent capabilities on road as well as off-road. With minor complaints(tires, headlight, mirrors, foot pegs, chain)this bike has taken me everywhere I’ve wanted to go. Tarmac, tar and chip, gravel, dirt and a little bit of mud and sand. Even have a couple of 14-16 inch deep water crossings under our belts. 11008

11009

11010

My back tire is pretty worn and my chain is sooo badly stretched that it’s tearing up the rear sprocket. I took it off along with the front and rear wheels the other day. All of the bearings are are still operating perfectly!
11011

This little motor, I think, is amazing. I plan on gearing it a bit higher with my new sprockets, but the motor is quite the little thumper. I added a NGK spark plug and wrapped the header and she purrs when it’s idling. Could possibly use a Makuni carb but I don’t think it’s needed for now.

Final thoughts...I have dropped this bike 30-40 times. Haven’t had any serious wrecks but it has hit HARD a handful of times. I’ve broken about 3” of the clutch lever, 1” off of the brake lever, the right mirror broke off at the base, lost a cover on the back right blinker, and all kinds of small dings and scratches everywhere on it! I definitely made the right choice purchasing “Jaws.” Because he eats up the terrain😁

[Weldangrind]

I can't tell from the pic on my old monitor; is your engine a CG or CB?

[Megadan]

The motor looks to be a counter balanced CG250, but it is hard to tell from the angle.

You have definitely given that bike a good thrashing of the course of this year to give it a fair review lol.

If the Shark uses the same basic sprockets as the Hawk does, then you can upgrade to a 520 chain. Might not help much with longevity in terms of wear from dirt and grit, but it should definitely stop it stretching as easily.

[goat67]

I can't tell from the pic on my old monitor; is your engine a CG or CB?

Pretty sure it is Counter Balanced

[culcune]

The three Bashan 'premium' bikes have seemed to definitely prove themselves--The Storm 250, Shark 250, and Brozz 250 have given many members here a lot of value for under $2k. We do/did get some more standard Bashan enduros as well, the one that comes to mind is the Blaze, but even those who purchased those had good experiences considering the lower prices they paid.

The most recent Bashan bike, in which the consensus isn't quite out yet, is the Hawk 250 fighting 'Enforcer'. I couldn't imagine it being much different from the Hawk, if not less things to tinker/improve on. But, not much member opinion on those out there vs. the NUMEROUS Hawk members.

[2LZ]

I can't tell from the pic on my old monitor; is your engine a CG or CB?

The ever-popular counter-balanced 229 CG.

[Maggpyer]

CB I think

[Shark250]

I’m new here and I recently purchased a second hand shark for 300$ drove it immediately from Omaha to my house in Lincoln and everything seems wonderful been riding it to work and having some fun. Mainly got it for my family’s cabin on the river just for some cheap fun and so far it’s been already worth the money. Just curious about some of the mods here such as the ngk spark plug as to the gap and specific plug you are using. I have found it hard to find any mod pages besides a few on here. Any help would be fantastic! My bike is a 2016 shark 250.

[JerryHawk250]

I’m new here and I recently purchased a second hand shark for 300$ drove it immediately from Omaha to my house in Lincoln and everything seems wonderful been riding it to work and having some fun. Mainly got it for my family’s cabin on the river just for some cheap fun and so far it’s been already worth the money. Just curious about some of the mods here such as the ngk spark plug as to the gap and specific plug you are using. I have found it hard to find any mod pages besides a few on here. Any help would be fantastic! My bike is a 2016 shark 250.
Most of the mods that are done on the Storm 250, Hawk 250, TT250 will work on the Shark. Most of these mods are covered in Megadan's thread for the Hawk and most will apply to your bike too.
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 (http://www.chinariders.net/showthread.php?t=20331)

[2LZ]

It's hard to kill a Hondoid. Get price too! 300.00. Wow!
Pics?

[Shark250]

Yeah it is identical to the picture above I can post some pics later. All in all the kid I got it from totaled his car and needed some quick cash and I offered 300 in person after a quick test drive and he accepted. And just to be sure when you said most of the mods will work on the storm did you mean shark? Kind of looked like a typo since you stated storm twice.

[JerryHawk250]

Yeah it is identical to the picture above I can post some pics later. All in all the kid I got it from totaled his car and needed some quick cash and I offered 300 in person after a quick test drive and he accepted. And just to be sure when you said most of the mods will work on the storm did you mean shark? Kind of looked like a typo since you stated storm twice.
The Shark and Storm are made by the same manufacture and share a lot of parts. Same engine.

[Cravin01]

I modded out my Storm and its basically the same bike with a few differences like head light and plastics, Your in the right place and all mods except airbox mod (not needed) works on all the Bashan's.

You really got a great deal on that bike and it will definitely give more than your money's worth in fun, Mine has been bullet proof so far.

[Shark250]

My kickstand just broke today haha anyone got any ideas how to fix would post pics if I knew how

[2LZ]

My kickstand just broke today haha anyone got any ideas how to fix would post pics if I knew how

Broke....like snapped in half?

[Shark250]

Yeah the wind blew it over and the spring shot off and bent the stand completely

[Shark250]

No it bent really bad sits at like a 30 degree angle now anyone have a spare they could mail me haha I’ll pay shipping! Or an alternative that I could buy

[Shark250]

Broke....like snapped in half?

It’s bent in half and I’ve contacted someone to have a new one built but they want 140 to bent it back and I want to know where to just buy a new one?

[culcune]

Surely you can find one similar? $140 seems a little steep. Even though Peace Sports only currently imports the Brozz, the Shark should be similar enough that the kickstand will work. Give them a call for a replacement.

[NzBrakelathes]

It’s bent in half and I’ve contacted someone to have a new one built but they want 140 to bent it back and I want to know where to just buy a new one?

Bend straight then weld some heavy angle to support it

[2LZ]

That has to be your basic Hondoid side stand. Even if you find one without the fancy little rubber thing, so be it.

Kinda like this:
https://www.ebay.com/i/232472054048?chn=ps


Or, like NZ says, just bend it back.

The biggest mistake folks make with these bikes is trying to get way too specific when attempting to find parts. Search things like "Chinese dirt bike kick stand" and topics like that.

There's also CSC. See link.

https://store.cscmotorcycles.com/TT250-OEM-FRAME-s/359.htm

[Shark250]

Got the new kickstand In today ordered it about a month ago now and it was the biggest waste of 14$ ever it’s worse than the broken one.
Seriously I measured and even asked them about the size and it’s about 4 inches shorter than it was supposed to be.
No returns no refund.
Would love for anyone to help me out with this I’m genuinely pissed off.

[Shark250]

Ok I haven’t posted or been on here in a while so quick recap I have a 2016 shark 250 and I love it. I have dipped it purple and it seems plastidiping plastics can stand the test of time (1 season of off-roading and power washing). I have recently upgraded my master cylinder and it took some work but my front breaks are ridiculously good at stopping my bike. I have upgraded to a mikuni carb and I currently have a 110 jet I believe. I think tomorrow before work I’m going to menards or Home Depot and I’m going to get some pvc or rubber tubes and finagle a cold air intake to bypass that worthless air box under the seat. Will post pics in a min. I know probably 7 people will actually read this but ����♂️ This a forum to talk about mods and how we personalize our bikes right.

[Shark250]

https://www.chinariders.net/picture.php?albumid=326&pictureid=1713
Here we go. I know some are ganna hate but I mean when I’m tired of it I can just peal it off

[culcune]

It looks good!

[Chrisguga]

That bike looks great and I’m personally glad you all are posting about the Bashan because I’m leaning towards buying one!