Will this carb fit the HAWK?

[Gh426]

https://www.ebay.com/itm/Universal-30mm-Motorcycle-Carburetor-For-Keihin-Carb-PWK-Mikuni-With-Power-Jet-/112952603624?_trksid=p2349526.m4383.l4275.c10#rwid

[ChrisWNY]

You'll likely need a flange adapter to bolt it to the engine head...

https://www.amazon.com/Mikuni-Rubber-Flange-Typical-M-VM28-200K/dp/B000WJC9R6/ref=pd_bxgy_263_img_2?_encoding=UTF8&pd_rd_i=B000WJC9R6&pd_rd_r=NQEVY8XM3VKC4P61SEV9&pd_rd_w=s0vT6&pd_rd_wg=hAYe7&psc=1&refRID=NQEVY8XM3VKC4P61SEV9


Why not go for the Mikuni VM26 for $10 more on Amazon shipped free?

https://www.amazon.com/Mikuni-Carburetor-Carby-Motorcycle-Motorbike/dp/B07CN36W65/ref=sr_1_1?ie=UTF8&qid=1533610840&sr=8-1&keywords=VM26

[JerryHawk250]

Yes, I have the Keihen PWK30 but does require an adapter. Check the link in my signature. I have a link in that thread for the adapter. The PWK 28 should work perfect on a stock Hawk.

[Gh426]

I was thinking the grips, throttle etc were included however upon careful inspection...
They Are NOT....

[JerryHawk250]

The PZ30 pumper carb would be a better choice for the stock Hawk engine.
http://s.aliexpress.com/iMfmQZvA?fromSns=Copy

[LiveLife]

What’s the best carb for the hawk 250??

[Cravin01]

The VM26 is a good basic all around carb,easy to set up and find jets.

I have the PZ30 pumper carb and love it. Easier kick starts and better power of the line. You'll need the new short pilot jets on this one though.. I have a link if you decide to go that with that carb.

[NzBrakelathes]

PE28 should be good - Taiwan company not a cheap copy etc
Direct fit like PZ30 series etc

[pete]

What’s the best carb for the hawk 250??

anything thats not made in China


..