I HAVE NO SPARK

[jhmotorsports]

I have an off branded atv, 70,90 or 110cc automatic. It has no spark. I changed the CDI and ignition coil and no luck. I have checked the different safety switches and they all seem to be functional. Any ideas?? Let me know. Thanks.

[mblas3]

Try disconecting the tether switch from the main circuit.

M

[liverchip]

Yep, check the cutout.

[jhmotorsports]

If I disconnect the tether and connect the two wires together, does that complete the circuit and allow spark? If it does, I did that and still have no spark. If that is wrong, please let me know.

[mblas3]

Connecting them together will ground out the CDI(no spark). Just leave them unconnected. Also check the brake/clutch saftey swicthes.

[jhmotorsports]

I have done all of those things. I will do it all again tomorrow though. Any other suggestions? I appreciate all the feedback.

[NewEnglandTrails]

Check for Blown fuses....

[jhmotorsports]

Actually, I forgot to post the solution I found. The rear tether switch was bad. I appreciate all the comments and solutions!! :D :D :D :D :D

[pedez2000]

stator