Carby

[Spamvader808]

Has anyone ever use a carb ment for a gy6

[RedCrowRides]

Any idea what the make and model of the carb is? I don't know anything about the stock GY6 carb, but i do know a lot of guys put the Mikuni VM22 or 26 onto the GY6 engine ,the VM22 is plenty for the Grom Clone 125cc engine, the VM26 is a tad large imo for a 125, the GY6 motor is a 150cc .


So, if it's a stock GY6 carb i cant help ya, if its a VM22 it will work, if it's a VM26 it " might" work if you jet it down but i cant say for sure .Maybe some of our scooter guys will be able to offer some addtl info ,especially if it is a stock GY6 carb .

[wlfpck]

You can use a GY6 carb... just going to need to tune it.

But realistically, the "hardest" part is going to be connecting the carb to the engine. The VM22 comes with the manifold that bolts to the engine and bolts to the carb.

If the GY6 manifold lines up, then super easy. If not... you'll have to figure out a way to connect it up. Probably fill the bolt hole on the GY6 manifold and redrill.

[Spamvader808]

Thank you for the advice I probly just go with the vm22