PDA

View Full Version : 300cc Utility?


Savage
02-15-2008, 01:20 PM
Anyone seen or ridden some of the newer 300 utility quads? They state that they are full size. Are they as big as a 500 Polaris, etc?
Thanks!

BIGHIRT
02-15-2008, 01:52 PM
Hello,
What brand were you asking about. I have tested a few and found that they are a little smaller. I did find that the 400-600cc chinese atvs matched up well against the big four.

katoranger
02-15-2008, 02:47 PM
The kymco ones are taiwan built, but they seem to be almost the same size.

Allen

Savage
02-15-2008, 04:47 PM
What about Lifan's 400ST?

lonfu
02-26-2008, 10:38 PM
I bought a buyang 300 4x4. I have ridden several diffrent brands of atv. Polaris,kawasaki, and others. I like the ride and size of the 300 better than some of the bigger japanese models. Suspension feels like a cadilac instead of a 3/4 ton pickup. Mine is the same size as the 600 kawa, maybe a little longer. I also have a 85 yamaha vmax, when I want to go fast. I think the 300 is not over or under powered for an atv. Wouldnt want to have to tow a 5000 lb. boat with it though!!!

roy :D

Savage
02-26-2008, 10:45 PM
WELCOME Roy!!
Where did you get your Buyang? How much do those cost?
BTW - VMax's are nasty!

lonfu
02-26-2008, 11:37 PM
heh Savage, well I live out in the middle of the mohave desert, literally. I am lucky to have a land line now, so I ordered it over the net from rightwayatv.com for about 3488.00 delivered to my door. I looked at the local japanese models and just didn't like what I was seeing for more than twice the money. It is a shaft drive, water cooled, 4 wheel disc. There are about a dozen diffrent net distributors for this brand. I chose this one due to the good BBB review of this distributor. This guy actually has 3 or 4 net sites. I have had couple tec problems and the dealer has stood good with advice and parts. He shipped me the parts for what I thought was wrong. Problem solved and runs like a top except for the elevation thing. I will buy from him again. So when you pass through the mohave desert and see a trail of dust it will probly be me on my BMW. (Buyang Motor Works) :)

Dcondrack
04-24-2020, 03:32 PM
Hi I know this is really old. I picked up brand new buyang 300. The problem is there missing the upper electronics. CDI. IGNITION SWITCH. KILL SWITCH. cannot find parts.

humanbeing
04-24-2020, 06:58 PM
Hi I know this is really old. I picked up brand new buyang 300. The problem is there missing the upper electronics. CDI. IGNITION SWITCH. KILL SWITCH. cannot find parts.
http://www.buyangvehicle.com/pdf/MANUAL-%20FA-D300%204WD.PDF https://atvconnection.com/forums/1-engine-problems/355645-no-spark-odd-cdi-system.html
:hehe: From theory, it's similar to Linhai which is a Yamaha VOG on steriod. Check the pinout 1st:
Standard 1 as:
https://unitedexpressdist.3dcartstores.com/assets/images/CDI-0068d.JPG
Quad/ ATV version had some speed limits: https://www.aliexpress.com/item/32900354720.html
Once confirm is which, we can help to find somthing works.

Sdalrymple
01-08-2021, 11:40 PM
So I’m new here and new to this discussion. Just bought a new Linhai 300 4x4 for our small farm to help haul feed etc. Love it so far. Any advice or anything that need to watch our for?

lonfu
04-03-2021, 08:36 AM
Don't let the fuel sit in the carb. suggest to drain the carb. alchohol in the fuel will clog the carb if you don't drain the float bowl.