2019 New Hawk 250cc enduro, needs performance upgrades.

[Mychel]

I found the Fuel / Air mixture screw after I extracted the rubber plug.
Remove the Carborator to do this, my bike would not run or idle.
I shimmed the needle jet with a small washer.

I need to find jets for my Carborator?

The Stock gearing SUCKS, I need info on regearing.

Removed the baffle, just behind the 3 screws, but the stock exhaust sucks big time no flow at all.

Hawk 250cc enduro needs help asap!!!

[Audihuff]

I found the Fuel / Air mixture screw after I extracted the rubber plug.
Remove the Carborator to do this, my bike would not run or idle.
I shimmed the needle jet with a small washer.

I need to find jets for my Carborator?

The Stock gearing SUCKS, I need info on regearing.

Removed the baffle, just behind the 3 screws, but the stock exhaust sucks big time no flow at all.

Hawk 250cc enduro needs help asap!!!


have you set your Valve lash? also i would not mess with the stock carb.. too much hassle when a 'mikuni' is only 30 bucks plus 5 dollar jet kit. check out motocheez on youtube and do a few searches on the forum.

[JerryHawk250]

Welcome aboard! :hi: You can find all this information in one spot. Check out the Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 (http://www.chinariders.net/showthread.php?t=20331)

[Megadan]

Welcome aboard! :hi: You can find all this information in one spot. Check out the Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 (http://www.chinariders.net/showthread.php?t=20331)

If you want any more specific information than my little guide can give you feel free to ask anyway. It's not the most detailed or in depth guide, just something to help get people started.