Waterproof Connectors

[JerryHawk250]

Well I got a chance to change out the connectors this morning to waterproof connectors. Just about every one had some form of corrosion. These make a nice clean job. https://www.amazon.com/dp/B07DZCG29P/ref=cm_sw_r_cp_apa_i_k95fDb8HATSYP

[Megadan]

This has been on my "eventually" mods list for a while now. Those connectors and most of the ones behind the headlight are my primary targets.

[JerryHawk250]

I changed all the connectors in that area including the other two you see in the picture. The one behind the headlight all look like new. I'll end up changing those another day when I install the round LED headlight in the fall.

[Wild Dog]

That's something i would like to do on mine and for 10 bucks, is quite tempting.

[wedooit]

Thanks for the link and input Jerry! I will order a kit. I use a snappy crimper, daily, mostly all our terminals are 14 and 16 gauge, my snappy crimper might be made by knipex. Will that work or do you recommend the one in your picture? thanks!

here is the link to the snappy I use
https://store.snapon.com/Crimpers-Pliers-Terminal-Crimping-Cutter-9-3-8--P885609.aspx

I also buy from this company for ease of delivery...has more pieces...
https://www.imperialsupplies.com/flyer/full-line-catalog/O41/156-1

[NzBrakelathes]

Just be sure the terminals can handle the current etc
IMO waterproof refit is a bit ott and I just have it all so I can repair stock and modify the original etc
Each to their own :)

[JerryHawk250]

Thanks for the link and input Jerry! I will order a kit. I use a snappy crimper, daily, mostly all our terminals are 14 and 16 gauge, my snappy crimper might be made by knipex. Will that work or do you recommend the one in your picture? thanks!

here is the link to the snappy I use
https://store.snapon.com/Crimpers-Pliers-Terminal-Crimping-Cutter-9-3-8--P885609.aspx

I also buy from this company for ease of delivery...has more pieces...
https://www.imperialsupplies.com/flyer/full-line-catalog/O41/156-1 these are the ones I have. I'm posting from my phone so can't make out what the crimper you have. IWISS Weather Pack Crimper Tools... https://www.amazon.com/dp/B071KFLY43?ref=ppx_pop_mob_ap_share

[JerryHawk250]

Just be sure the terminals can handle the current etc
IMO waterproof refit is a bit ott and I just have it all so I can repair stock and modify the original etc
Each to their own :)
It's a must where I ride off road. They will get immersed in salt water and sand. The connectors I replace where corroded and full of fine sand.

[NzBrakelathes]

It's a must where I ride off road. The will get emerged in salt water and sand. The connectors I replace where corroded and full of fine sand.

Very fair call! Salt kills

[Weldangrind]

Jerry, perhaps you'd consider adding this link to your signature, making it easier for others to find in the future.

[JerryHawk250]

Jerry, perhaps you'd consider adding this link to your signature, making it easier for others to find in the future.
I would but I'm at the limits of the amount of text I can put in my sig.

[JerryHawk250]

Here's my latest video showing those connector install plus a few other updates.

https://youtu.be/zvHFber-j10