PDA

View Full Version : looking for parts, need help


jl250p
10-07-2019, 02:29 PM
Hello, new to the forum and Chinese bikes here.
I have a Jinlun JL250P (full fairing sport bike, 250, single cylinder) that came to me without a battery and I obviously need one. Can someone point me to what battery I need? I'm having a hard time figuring out what I need.
Also, are there carb rebuild kits available? If so, what should I be shopping for?
Thanks!

JerryHawk250
10-07-2019, 02:36 PM
Measure the compartment that the battery fits and what side the + & - poles need to be on. Go to Mighty Max batteries website and get the highest amp battery that will fit. You can filter by size. https://www.mightymaxbattery.com/c573/motorcycle-power-sport.html

jl250p
10-07-2019, 02:39 PM
I was hoping for a known fitment. Something from BikeMaster or Yuasa perhaps.
For instance, does the battery for a Rebel 250 drop right in? Some other model?
Thanks

JerryHawk250
10-07-2019, 02:39 PM
As far as the carb kit please post a picture or what kind of carb you have. Most of the time you're better off just getting a new carb for a few extra bucks.

JerryHawk250
10-07-2019, 02:45 PM
I was hoping for a known fitment. Something from BikeMaster or Yuasa perhaps.
For instance, does the battery for a Rebel 250 drop right in? Some other model?
Thanks
Only thing I know is that your bike originally came with a 12V / 9Ah battery. Measure the compartment and that will narrow it down. The Mighty Max Part number is the same as Yuasa so that will help to track down the right battery.

jl250p
10-07-2019, 03:20 PM
Thanks, Jerry. I'll look into it a bit more.

jl250p
10-08-2019, 01:03 AM
PZ30

https://i.imgur.com/6iDx04tl.jpg

JerryHawk250
10-08-2019, 08:19 AM
Same PZ30 that comes on most of these bikes. Most on here would replace that with a Mikuni VM26 clone. You can pick them up fairly cheap along with some jets to fine tune.
https://www.amazon.com/Mikuni-Carburetor-200cc-Motorcycle-Motorbike/dp/B07CN36W65/ref=sr_1_17_sspa?keywords=Mikuni+VM28&qid=1570536973&sr=8-17-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQ0FPMEpKVUlRUjhFJ mVuY3J5cHRlZElkPUEwNjM2NDM2MjdKVkVYVEwwNDlVJmVuY3J 5cHRlZEFkSWQ9QTA0NzQ3NDcyVktaMkROVVZHUjYyJndpZGdld E5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm9 0TG9nQ2xpY2s9dHJ1ZQ==

or the PZ30b pumper carb which would be a better carb.