Need a legitimate jet kit for 2020 brozz 250 please

[Brozz250welder]

Ordered a kit on Amazon it just arrived. $39.95 it included a 107.5 a 112.5 a 38 a few washers a wood screw and a drill bit. Pretty pissed the bike already has a 105 those are useless. Any suggestions or insite as to why I got a a countersunk wood screw? Also a link with a real assortment of jets. Amazon link? I would appreciate it. Thank you is the carb a keihin pe 30?

[Brozz250welder]

21558

[mtiberio]

https://sites.google.com/site/motocheez/brozz-250

[Baskt_Case]

That kit looks like its for tuning a stock Hawk carb. Hawks come with tamper proof bowl screws, a rubber plug over the fuel screw, a needle without clip slots, and a weird pilot jet.

If you dont know what carb you have, we need a picture of both sides. Is it the carb that came with your bike? If its the factory carb, its definitely not a PE30. They are often a "sealed" PZ30 but you said you've already been inside the carb.

www.jetsrus.com can help you identify your jets

[NzBrakelathes]

That’s an expensive kit but looks right
1 pilot several main jets

[Brozz250welder]

Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb,
The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary.

[KseKermit]

Thanks guys. Yea I thought it was going to be a very complete and extensive kit. I dont know what carb,
The bike is arriving Tuesday. I just want to have something on hand to tune it if necessary.

Yep link mtiberio sent is what you need. I actually over drilled my main, got a piece of copper wire macgyvered in there to restrict flow until my kit comes in.