brixtonrider
07-17-2022, 04:57 AM
As it seems almost impossible to source air filters for Brixton BX125 in Europe (the original bike, before the Felsberg/Cromwell) i was thinking going aftermarket.
I'm entertaining the idea of removing the air box altogether and placing a K&N filter straight on the intake, much like the screenshot below shows.
In the video the gentleman mounts both the K&N and the air box with the original filter in sequence, which in my opinion would only make things worse for performance.
I have the stock ECU on it, Delphi MT05 with the lambda sensor on the exhaust.
Any downsides if i completely remove the airbox and just add the K&N?
https://www.youtube.com/watch?v=pXD5eDyspLE
I'm entertaining the idea of removing the air box altogether and placing a K&N filter straight on the intake, much like the screenshot below shows.
In the video the gentleman mounts both the K&N and the air box with the original filter in sequence, which in my opinion would only make things worse for performance.
I have the stock ECU on it, Delphi MT05 with the lambda sensor on the exhaust.
Any downsides if i completely remove the airbox and just add the K&N?
https://www.youtube.com/watch?v=pXD5eDyspLE