Log in

View Full Version : Apollo Commander 200 (RFZ). Engine light and speedometer distance

hanex
06-30-2023, 02:47 AM
Hi,

Couple of questions about Apollo commander.

What could be the reason because I get the engine light show up when I reverse with ATV. It is coming only when reversing, not for N or going F. The dial does not say it is on reverse so R is not on, but reverse is still mechanically working. Maybe adjust something to get R to show on dial also? but could it be the reason also for engine light?

Another question is about speed meter. What could be the reason because it is resetting the ODO meter after power off? Now I have 25 km on dial and for example before shutting power of it has 26km and after power on it has 25 again?

-Hannu
Bruces
06-30-2023, 07:49 AM
It sounds like you have some wires mixed up with the gear shift indicator,and the odometer sounds like it’s missing it’s constant power feed .Is this a new bike ? If so re check the connections you made while assembling the bike .
hanex
06-30-2023, 08:11 AM
It sounds like you have some wires mixed up with the gear shift indicator,and the odometer sounds like it’s missing it’s constant power feed .Is this a new bike ? If so re check the connections you made while assembling the bike .

Well it is not used ATV, so there might be some wiring issues still, I already fixed ignition lock wiring mix. Ok so odometer needs constant power, how about if battery gets disconnected, does it reset the odometer ?

-Hannu