BkrMike
04-15-2025, 04:27 PM
Hi everyone,
I removed my clutch switch wire harness and mis-placed it. Now of course the bike won't start in gear since there is no connection to show that the clutch is pulled in or not. I looked at the schematic that came in the owner's manual but it is so blurry, it is impossible to tell which wires the switch tied into. I found three wires in the main harness that do not have anything attached (one green, one green with a black stripe and one brown with a white stripe). Does anyone know which wires the clutch switch ties into? I still have the switch so I could just solder some wires to the terminals and tie into the main harness wires to get the start in gear function working again. Any help would be appreciated.
I removed my clutch switch wire harness and mis-placed it. Now of course the bike won't start in gear since there is no connection to show that the clutch is pulled in or not. I looked at the schematic that came in the owner's manual but it is so blurry, it is impossible to tell which wires the switch tied into. I found three wires in the main harness that do not have anything attached (one green, one green with a black stripe and one brown with a white stripe). Does anyone know which wires the clutch switch ties into? I still have the switch so I could just solder some wires to the terminals and tie into the main harness wires to get the start in gear function working again. Any help would be appreciated.