CARB adjustment...NEED HELP!

[Nova112288]

ok, i was doing the carb adjustment today on the bike. i got it all put together and the throttle is stuck. so i took it back apart and opened that part on the carb up, checked it out, looked fine, and put it back on. then i turn the throttle, and the cable keeps sticking. wtf?

does anyone have any suggestions? they'd help me out a lot, thanks.

[alonzo]

there is two tabs inside the carb slide one starts up top and is easy to spot the other is towards the base and is a little more difficult to get the carb to catch.

If you twist the throttle and compress the spring before you insert the slide it will be a little easier to hit the lower tab.

if you cant get it to slide dont force it. take the carb off so you can see the lower tab you are missing.

you will know you got it right if the throttle freely moves back to idle without forcing it.

[Nova112288]

i dont know what tab you are taking about. and the thing sliding, are u talking about that black thing inside the carb?

[alonzo]

here review this.

http://www.chinariders.net/modules.php?name=Forums&file=viewtopic&t=3743

the 12th pic down shows the lower tab that you need to watch out for.

[Nova112288]

ok its done! thanks alonzo! that thing helped. it runs soo good now. i dont even need to give it gas to start it up and it idles all by itself. before i had to keep giving it gas and it'd have to be really warm to idle by itself. its so nice now. well i'm going to go ride it over to my buddies houses and we're going to a crab feed! i haven't ate all day so it could taste even better. thanks for the help!!

[alonzo]

glad I could help

happy trails dude 8)

[IronFist]

Nice.... a happy ending. :D