View Full Version : Lifan 163FML
Forklift352
09-04-2008, 12:40 AM
What was this clone based off of??
Do we know if it was a old school Honda???
VinceDrake
09-05-2008, 12:11 AM
Sort of, the general concensus is they are *loosely* based on the old Honda XL series. But as I understand it, they are pretty much unique to China, and parts do not interchange with the Hondas, with a few notable exceptions.
There's a sticky under DS/enduro called "PARTs, PARTS, PARTS" that has some of the stuff that actually *will interchange.*
Hope this helps
--Vince
katoranger
09-05-2008, 01:14 AM
The bottom end is real close to a xl185 by my comparisons.
The other thought is they are based off the cb125 engine.
Allen
Qingdao
09-05-2008, 01:44 AM
I heard the stroke and timing is completly different among other things.
Forklift352
09-15-2008, 02:41 PM
Thanks for the help!
Im looking more for sprockets(drive)So far I got 3 I got on line.
Annnnnnnnd they dont fit :evil: I know shaft hole is 20mmx17mm
but the teeth are a weeeeee bit off.
VinceDrake
09-15-2008, 03:45 PM
You should be able to find the part numbers under "Sprockets, 428, 520" in the D/s forum, sprocket numbers and what not. As well, the guy with the knowledge of all things sprocket, would be Bruce from EJ cycles...
Here's the link: http://www.chinariders.net/modules.php?name=Forums&file=viewtopic&t=1393
--hope this helps
--Vince
DDG1976
09-15-2008, 03:48 PM
There's also a compatability chart under tech info, It's for the gy- and clones.
katoranger
09-16-2008, 12:44 PM
Yes. Call Bruce at 330-274-0098. He will have the answer and probably the correct part.
You NEED to call him to get ahold of him.
Allen
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.