tube missing from carburetor - jianshe js80py

[bigrobbie]

hi,looking for a little advice about my sons js80py,i noticed that there was a pipe missing from the carburetor area its the small brass tube about an inch above the mix screw anybody got any idea what should be on there ,and where the pipe should be going to
thanks

[lynchburg]

go to yamaha's website and look at a PW80 parts breakdown. The bike was copied from the yamaha pw80. Yamaha has a good parts breakdown on their site. It may show you something.

[katoranger]

Does this help?

http://www.bikebandit.com/houseofmotorcycles/1994-yamaha-motorcycle-pw80f/o/m7437

Is it for the oil injection?

[bigrobbie]

Does this help?

http://www.bikebandit.com/houseofmotorcycles/1994-yamaha-motorcycle-pw80f/o/m7437

Is it for the oil injection?




thanks great help it was the small angled pipe number 27 that was missing cheers
robbie

[bigrobbie]

go to yamaha's website and look at a PW80 parts breakdown. The bike was copied from the yamaha pw80. Yamaha has a good parts breakdown on their site. It may show you something.


hi thanks for your help managed to locate where the missing pipe should go ,as the little bike is based on the pw80 does this mean every part is interchangable with the yamaha, and do you know if its a yamaha engine

thanks robbie

[lynchburg]

They interchange many parts. I would not say everything is the same. Jianshe has a joint venture producing Yamaha's in China. They actually make good atv's . The reason we don't carry them is the U.S. parts and distribution is unreliable.