Qlink XF200 Exhaust

[JTCAndrew]

Getting closer to ordering this up - Maybe this week.

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/t4sys_lg.jpg

Andrew :)

[JTCAndrew]

I hope the Pro Cicuit T4 Actually sounds this good on my xf200

http://www.youtube.com/watch?v=HQQxYmPsrvQ

Andrew :)

[Weldangrind]

I'm sure that it will. Pro Circuit makes an excellent quality pipe.

[JTCAndrew]

Ok - I just ordered up the Complete system yesterday. I will report back with pics and more. Should be here in a few days. If I'm luck by the weekend. :)

[ktm_ftw]

im realy hopping to hear that it fits :P other wise i'm getting a tip and thats it

[JTCAndrew]

Ok I'm going to do my Best and take a few pics soon. Worst case senerio Sunday I will put her on completely, but hold tight - My store keeps me hoping 12+ hours a day as is, but I promise no later then Sunday to get some more info to ya!

[FastDoc]

Ok I'm going to do my Best and take a few pics soon. Worst case senerio Sunday I will put her on completely, but hold tight - My store keeps me hoping 12+ hours a day as is, but I promise no later then Sunday to get some more info to ya!

Sounds like job security to me! Are you self employed?

[JTCAndrew]

Yes - I own http://www.jamestowncomputer.com - Life is Good 28yrs in the business - 10 Year US ARMY Disabled Desert Storm Veteran.

[FastDoc]

God bless you. You're a fine American and thank you for your service. I'm also self employed. Our small businesses are the building blocks this country's economy are built on. Keep up the good work. 8)

Enjoy your Q. Imagine how much MORE fun it will be with gas in it out on the road! :P

[JTCAndrew]

Thanks Doc - Yeppers can't wait. I will be posting up some pics soon of the New Exhuast and Install etc.....Thanks AGAIN and have a greta day and ride safe.

Andrew :D

[JTCAndrew]

ok Guys thought I would post a few Teaser Pics for ya. My Goall is to try and put the system on this Sunday as long as time allows. In the Meantime here are a few pics. The System I bought on Ebay for a Suzuki DR-Z125 The system came complete with a Sticker, Instructions, and some AntiSeeze. It is SUPER Light - maybe 4lbs in all. I paid $200 for the complete system which included shipping from I think Minisota. Enjo and stay tuned for the Actual Install.

Andrew - Jamestown, PA
2009 Qlink XF200 Super Moto

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2136.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2139.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2138.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2141.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2143.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2142.jpg

http://i1238.photobucket.com/albums/ff492/Andrew_Fornal/Pro%20Circuit%20T4%20Exhaust/DSCF2132.jpg

[jape]

Looks good Andrew, there's a few of us waiting to see how it goes to replace the rusty old heavy things our bikes came with. Well me anyway and some Adrenaline 125 owners back in UK have been asking about mufflers.

A comment, the one in the first picture is a fair bit longer and would be the one I would want. A shorty muffler like you actually got would burn any passenger's leg and/or luggage which is fine if you are just going one-up and local.

Did you choose the short one or was the pic wrong?
And as it is off a DR125, won't it restrict the 200cc a bit?

[JTCAndrew]

The TOP Picture above was representation only sorry. I do NOT see any restriction issues with this Can as it is WIDE Open compared to the Factory Stock Exhuast Can. As far as it being shorter Yeah alittle but should NOT Cause any issues with burning passengers ect, becuase it won't stick out anymore then the original factory exhaust can does. I'll be sure and get you as many detail pics and more as I can on Sunday just bare with me and be patient. I'm not sure about you bike, on just how much it actually is like my Qlink XF200 But "LOOKS" Quite similar. Check back here soon for the actuall install Pictures etc....on Sunday afternoon.
Thanks

Andrew :D

[FastDoc]

It's good you're changing the header to get rid of the catalyst. :D

[jape]

Great! Thanks. Mine is 38mm pipe, which is the same as yours I think, but it can always be changed, and the can itself is 550mm in length. I have found that the hot gases from the back end do melt nylon luggage and also the pipe melts the soles on passenger shoes, that may have been avoided though with a slightly different position ... that's why a shorty wouldn't do me!

I notice you don't have a luggage rack and also that the can has a downward pointing tip to it so this wouldn't apply to you.

Could you please add a link to the store online? Probably freight will be too much but you never know.

[JTCAndrew]

Here is the Link on Ebay:

http://cgi.ebay.com/ebaymotors/PRO-CIRCUIT-T-4-F-S-KAW-KLX-125-SUZ-DRZ-125-4S03125-/370478110620?pt=Motorcycles_Parts_Accessories&hash=item564237579c

Andrew :D

[david3921]

It's good you're changing the header to get rid of the catalyst. :D

The Qlinks/Qingqi/Konkers don't have cats in the header, Doc. They just have that paper/aluminum looking honeycombed stuff in the pipe. New ones don't have the air injection in the pipe either so it's easier to just add the pipe without messing with the eviro stuff.

[FastDoc]

That honeycomb stuff is the cat I believe. The air injection is a joke. I'm glad they left that off. My guess is that it was only necessary for the Kalifornia versions.

[JTCAndrew]

Yeah - My header pipe doesn't have any of that. The NEW Pro Circuit T4 Pipe i'm sure will be loud - As you can look straight thru it. There is a Light Screen on the inside. (But you can see right thru it) - Should be putting her on Sunday - If time allows that is! LOL :D

[FastDoc]

If it's TOO loud you can probably switch the tip to a Q4.

[JTCAndrew]

I'll have to look that up Doc - Got any referance links for me - My tip definately could be swapped out I guess. The end comes off with Allen wrenches so you can repack her anytime. - Off to search more on the Q4 Tip.......Thanks.....Andrew :D

[JTCAndrew]

Doc I'm assumining this is what your refering too? Just found these:

http://www.procircuit.com/store/pc/viewCategories.asp?idCategory=227

Andrew :idea:

[FastDoc]

I think so. I know that there is a model, IIRC, called the Q4 that people use when riding in organized dualsport rides because the other style won't meet the noise requirement.

[SpudRider]

The Q4 is an entirely different muffler, manufactured by FMF Racing. ;)

http://www.fmfracing.com/Products/MX/380

Spud :)

[FastDoc]

My bad. Thanks for the clarification. :oops:

[JTCAndrew]

Ok Guys here it is - I never seem to get the posts in the right place - EVER - LMAO - Here ya go:

http://chinariders.net/modules.php?name=Forums&file=viewtopic&t=11402&highlight=

Andrew :oops:

[SpudRider]

Ok Guys here it is - I never seem to get the posts in the right place - EVER - LMAO - Here ya go:

http://chinariders.net/modules.php?name=Forums&file=viewtopic&t=11402&highlight=

Andrew :oops:
Thank you for documenting your work, Andrew! :)

Spud :)