Go Back   ChinaRiders Forums > SpudRider
Register FAQ Community Calendar Today's Posts Search
Conversation Between SpudRider and Diggy
Showing Visitor Messages 1 to 7 of 7
  1. Diggy
    03-20-2016 03:19 PM
    Diggy
    Spud I got some flashers and got pics of them on my posts.

    Can you tell me what one to use, also since my Lights are hooked up straight to battery with no on off switch how do I mend something to shut off the lights?
  2. Diggy
    03-17-2016 11:32 PM
    Diggy
    Hi Spud, I sent another msg in my Thread, Check it out.
  3. Diggy
    03-29-2015 04:12 PM
    Diggy
    Spud check my last post, about the wiring im trying to do.
    I have a video to show you the bike and the wiring harness that came with the bike, and also my new wiring harness.. *note you may need headphones to hear the video*
    sorry..
    Thanks a million!!!! I O U!
  4. Diggy
    03-21-2015 10:31 PM
    Diggy
    Hi Spud, so I sent an email to Baja asking for them to help me identify what wires do what on my harness. When I get more info Ill let you know and you can help me wire the light properly.... Thanks a million... any tips let me know.. I think I found out what the white wire and black wire from my Light Switch is, I have a "Kill Button" on my Light switch.. I think that's what those wires are for.. Im not 100% sure tho.
    I will not need the engine kill switch bottom since I already have one on my other switch that has the Electric Start button is.

    Thanks again !
  5. Diggy
    03-19-2015 10:02 PM
    Diggy
    Hi Spud, can you check out my post on the m3c led bulb, Im not to sure on what to do..
    Will it work for my bike? lf200gy-2?
  6. Diggy
    03-18-2015 11:06 AM
    Diggy
    Hi Spud, can you check out my post and help me it. I'm stuck at this point and can't continue. When is the best time I can chat with you

    Thanks a Million!
  7. Diggy
    10-16-2014 10:05 PM
    Diggy
    Hi Spud,
    So I went a got the new carb from ebay http://www.ebay.ca/itm/Carburetor-Ca...4db403&vxp=mtr

    Weldangrind told me that would fix my cure from having my bike not quit out on me when its trying to idle.

    He told me I should get some Jets aswell, would you know anything about how hard it will be to install this myself? Is there any good utube videos on how to replace one of these and what else wouldI need. Mikuni jets are easily found, including at your local Yamaha dealer. I'd buy the Mikuni, buy some larger jets for it (which are really cheap. How many Jets would I need?

    Thanks Spud

All times are GMT -4. The time now is 07:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.