ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Other Brands (http://www.chinariders.net/forumdisplay.php?f=121)
-   -   1973 Honda CL350 K5 Project (http://www.chinariders.net/showthread.php?t=5824)

Jim 05-14-2012 08:19 PM

What they told my dad was there was a dead cell or something. I never had a problem with the battery, it was the bike. My dad may have one of those load testers I will have to ask and keep it in mind, thanks :)

Weldangrind 05-15-2012 01:29 AM

Does your old battery need a good home? What are the dimensions?

Jim 05-15-2012 01:40 AM

I think my dad is either going to put it in a honda jazz (they bought scooters), or the honda cj360t. Sorry. :wink:

Weldangrind 05-15-2012 01:26 PM

No problem. I was going to offer you a few bucks if you had no use for it.

Jim 05-16-2012 11:41 PM

If that was the case I would gladly have passed it along, but around there, there is more than enough uses for it :lol:

I was just looking through this thread to see the progress, and wow, 2 wires mixed up stalled me for a year :roll: Now I'll know what to look for next time :)

Weldangrind 05-17-2012 02:05 AM

Any updates on the cj360t?

Jim 05-17-2012 08:19 AM

Not yet, I wanted to get the cl350 done first

Jim 05-20-2012 01:44 AM

Found another cool site for my bike today http://benmiranda.com/my-honda-cb350/

Changed the bulbs in the dash, tightened the chain, and changed the oil.

I was going to remove the oil filter cup to clean it when I changed the oil, but I don't think it's possible to remove it without taking the right case off the motor. I took the oil filter cover off and cleaned the cup out the best I could with it on the bike. The screen on the oil pump, I believe I have to remove the clutch and oil pump together just to get to the screen.

I'm planning on changing the oil again before too long, it's got a lot of years to clean out.

I also need to loosen my chain a bit, I over tightened it slightly.

Rode it a bit, another trouble free day, I think I've got things worked out :)


All times are GMT -4. The time now is 06:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.