ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Zongshen RX3 (http://www.chinariders.net/forumdisplay.php?f=136)
-   -   New Zongshen RX3 (ZS250GY-3) Dual Sport (http://www.chinariders.net/showthread.php?t=13440)

SpudRider 09-11-2014 12:57 PM

Quote:

Originally Posted by Wolftrax (Post 172438)
Want to build two?:D

As a favor, I used to build custom wheels for the Zongshen 200GY-2 at discounted prices, but I stopped when it became too much of a hassle. ;) However, if I get a ZS250GY-3, I will build custom rear wheels for the market price. ;) If I don't get the bike, I won't be making custom wheels. However, you can get Buchanan's, Woody at ADVRiver, et cetera, to build a wheel for you. :)

SpudRider 09-11-2014 01:28 PM

I love spoked wheels. :) I prefer the appearance of spoked wheels, as well as the added strength. In addition, you can build a custom wheel to your preference if you order custom spokes. :tup:

SpudRider 09-11-2014 01:35 PM

There's no doubt about it, the orange bike looks best. ;) It's also the fastest, as demonstrated by the orange bike leading the pack in the photo below. :)

http://motoroids.com/wp-content/uplo...-TRX-300i7.jpg

:hehe:

SpudRider 09-11-2014 01:42 PM

The forks appear to be the standard, 37mm forks with about 6.5 inches of travel. The standard Chinese forks are adequate, but nothing to write home about. ;)

http://www.taobao.com/view_image.php...Rate=4788&fv=9

SpudRider 09-11-2014 02:23 PM

The RX3 rear wheel appears to be very similar to the rear wheel on my 2004 CRF250X.

http://item.taobao.com/item.htm?spm=...31&ns=1#detail

Could a custom wheel build be so simple, and inexpensive, as merely using a Tusk Impact Rear Rim and Spoke Kit? ;)

http://www.rockymountainatvmc.com/p/...ke-Kit?v=10483

http://www.rockymountainatvmc.com/im...it-blk_all.jpg

I wouldn't be surprised to learn that Minsk is getting the RX3 with the stock, 15-inch rear wheel, and building a custom, 17-inch rear wheel for each motorcycle.

Wolftrax 09-11-2014 02:31 PM

Just got off the phone with Steve at CSC. I asked him about getting the RX-3 spec'd with 17" wheels like the Minsk. He said the bikes will ship with 15" wheels but they will have the 17" available as an option and either do the swap at the the time of pickup or DIY. He went on to say that they will also stock 15" tires in various configurations.

Wolftrax 09-11-2014 02:36 PM

Quote:

Originally Posted by SpudRider (Post 172456)
The RX3 rear wheel appears to be very similar to the rear wheel on my 2004 CRF250X.

http://item.taobao.com/item.htm?spm=...31&ns=1#detail


Wow thats cheap for a wheel!!

560 Chinese Yuan equals
91.35 US Dollar

SpudRider 09-11-2014 02:39 PM

That's great news, Wolfie. :tup:

Given the weight and suspension of this bike, it's not designed to do technical off road riding. Some of the commonly available rear tires would probably suffice for many riders of the RX3. ;)

http://www.chinariders.net/showthread.php?t=5394

SpudRider 09-11-2014 02:42 PM

Quote:

Originally Posted by Wolftrax (Post 172458)
Wow thats cheap for a wheel!!

560 Chinese Yuan equals
91.35 US Dollar

Yes, the prices at Taobao are wonderful. :tup: However, the shipping costs would probably double the delivered price of that wheel. ;)

fishman10 09-11-2014 05:55 PM

Zong rx3
 
I also called an tried to convince Csc. To ship the bikes with 17" rear wheel , but was unsuccessful , they assure me they will stock tires .

culcune 09-11-2014 08:48 PM

Quote:

Originally Posted by SpudRider (Post 172453)
There's no doubt about it, the orange bike looks best. ;) It's also the fastest, as demonstrated by the orange bike leading the pack in the photo below. :)



:hehe:

Science doesn't lie!! ;)

Weldangrind 09-12-2014 10:39 AM

Quote:

Originally Posted by SpudRider (Post 172456)
I wouldn't be surprised to learn that Minsk is getting the RX3 with the stock, 15-inch rear wheel, and building a custom, 17-inch rear wheel for each motorcycle.

I would be surprised. If our Russian friends are ordering the bike, they could certainly spec a 17" rear wheel with it. The cost would be negligible.

I doubt that the Russian dealer is relacing each wheel, when a selection of 15" tires is likely available to them. It would be easy to have a tire order included in the shipping container.

Weldangrind 09-12-2014 10:42 AM

Quote:

Originally Posted by SpudRider (Post 172456)
Could a custom wheel build be so simple, and inexpensive, as merely using a Tusk Impact Rear Rim and Spoke Kit? ;)

http://www.rockymountainatvmc.com/p/...ke-Kit?v=10483

That certainly makes it easy and affordable, and the tire selection increases dramatically.

Weldangrind 09-12-2014 10:44 AM

Quote:

Originally Posted by SpudRider (Post 172452)
I love spoked wheels. :) I prefer the appearance of spoked wheels, as well as the added strength. In addition, you can build a custom wheel to your preference if you order custom spokes. :tup:

Me too. Lightweight, easy to maintain and good looks. While I like Comstars, there's precious little you can do to them except change the colour.

Weldangrind 09-12-2014 10:48 AM

Quote:

Originally Posted by SpudRider (Post 172448)
I doubt you can find the 17-inch rear wheels on Taobao. :ohno: If the Minsk truly has a 17-inch rear wheel, I'm confident the Russians specified the change to Zongshen, and the special wheel is only available directly from Zongshen.

If they spec'd the wheel, then it is likely available in China. It's a matter of digging for it, and we know someone who is really good at that. :D

That said, your discovery that the hub is Honda-like makes the Tusk rim and spoke kit a better deal than shipping a 17" from China. I'd rather have an 18" wheel anyway.


All times are GMT -4. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.