re jetting?
 

I have my hensim 250 pheonix tore down and put new exhaust on it but now i need to re-jet the carbs i think. any idea where to look for jets and what size i should start with? it is strait pipes no baffles so it needs to get more fuel i assume. thanks in advanced for the help.

Do you have two carbs on it? What size are the jets now?

single carb, not sure what size the stock jets are in it. where could i find that?

Best bet would be to look at the old jet. You may need a magnifying glass to see the numbers if your eyes are like mine. :wink:

You might be able to tell by seeing what the stock jet is in a Rebel 250, but I could not promise it would be the same.

I took some pics when I swapped jets on a Chinese atv, but it's all the same. Check out page four: http://www.chinariders.net/modules.p...r=asc&start=45