Wiring Diagram for my Hensim 150cc GY6 ATV
 

A while back I had a minor problem with intermittent no spark on my 150cc Hensim GY6 quad. It was caused by a flaky tether kill switch which I have since replaced. But I didn't have a wiring diagram so I got a little obsessed and traced the whole thing out from stem to stern. In case this might be of help to others with wiring issues I'm going to attempt to post it. I've never done this embedded picture thing before, so lets see if it works:

http://i397.photobucket.com/albums/p...ccATVPage1.jpg

http://i397.photobucket.com/albums/p...ccATVPage2.jpg

I converted these to jpegs for photobucket.com. The original jpegs are very readable, but photobucket has blurred it up a bit. I think it is still readable.

The schematic was drawn using the free schematic capture program at ExpressPCB.com. I have the source files if anyone needs them.

Not having a wiring digram can make a simple job much more difficult.

Lynn Edwards

That's beautiful! Thank you very much, for your time and effort!

Hmm, Right Click, Save target as.... :D

--Vince

Re: Wiring Diagram for my Hensim 150cc GY6 ATV
 

[quote="LynnEdwards"]A while back I had a minor problem with intermittent no spark on my 150cc Hensim GY6 quad. It was caused by a flaky tether kill switch which I have since replaced. But I didn't have a wiring diagram so I got a little obsessed and traced the whole thing out from stem to stern. In case this might be of help to others with wiring issues I'm going to attempt to post it. I've never done this embedded picture thing before, so lets see if it works:

Lynn,
What did you replace the tether killswitch with? Mine is way tight. I think it would remove my hand if I fell off this thing. Other than that I am pretty happy with my Hensim 150.

Nice work Lynn. :D

Re: Wiring Diagram for my Hensim 150cc GY6 ATV
 

I bought one off eBay for just a few dollars. It has a rubber boot with a cord on it that presses down a push button switch keeping it open. The one I bought comes off easily.

Wow, I never even saw this, I'm hoping mine is very close to this, it will help a lot!!

Thanks for your effort!!