ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Dual Sport/Enduro (http://www.chinariders.net/forumdisplay.php?f=101)
-   -   Hawk 250 rear wheel spoke size (http://www.chinariders.net/showthread.php?t=31097)

iLawrence111 06-25-2022 04:14 PM

Hawk 250 rear wheel spoke size
 
I know this has probably been asked on here before but without all of the extra nonsense, is anyone able to post a link to a site where I can buy spokes for a hawk 250 rear wheel? Please and thank you.

Megadan 06-25-2022 05:03 PM

These work.

https://www.aliexpress.com/item/2251...apt=4itemAdapt

From this thread. https://www.chinariders.net/showthre...rR0BW8hP9MBfNw

If you need help searching things, instead of searching on the forum directly, which I have always had hit or miss luck with, search for it on google with chinariders.net at the end of your search query. I tend to find more results that way

iLawrence111 06-26-2022 12:58 AM

Ouch, so I guess no luck going for a ride within the next 4 weeks bc of that delivery time?

iLawrence111 07-02-2022 06:51 PM

Update
 
Found spokes that work on ebay. Not sure how long this link will work but here you guys go. https://www.ebay.com/itm/27479652598...kAAOSwHhVgnXXq

chxrs 07-07-2023 06:38 PM

I'd rather not spend $30 on spokes, so I've decided to fabricate some. I know that the spokes are 4mm diameter, and around 6 inches long, so I've bought some solid steel rods that are 4mm in diameter. They arrive on 7/11/2023 and I'm going to use a die to put the right threads on the end, then I'll forge them into spokes with the head and bend. I'll let you all know how it goes. All else failing, I'll just bend the metal into hooks and hook it though the hubs, but I am going to try to fabricate spokes that are as close to original as possible.

Megadan 07-07-2023 09:26 PM

Quote:

Originally Posted by chxrs (Post 397204)
I'd rather not spend $30 on spokes, so I've decided to fabricate some. I know that the spokes are 4mm diameter, and around 6 inches long, so I've bought some solid steel rods that are 4mm in diameter. They arrive on 7/11/2023 and I'm going to use a die to put the right threads on the end, then I'll forge them into spokes with the head and bend. I'll let you all know how it goes. All else failing, I'll just bend the metal into hooks and hook it though the hubs, but I am going to try to fabricate spokes that are as close to original as possible.

Sounds like a fun exercise, but if you think 30 for a whole set is bad, I've paid more than that for one spokes with matching spoke nut on real Hondas lol.


All times are GMT -4. The time now is 07:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.