herbie |
06-11-2019 02:04 PM |
3 Attachment(s)
Getting closer, charging battery, and need to change engine oil and valve adjustment and a do dad here or there.
I attached a couple of pics to help someone in the future. The 3 bolts given for the front fender bracket, 2 work fine but the one closest to the engine needs to be a little shorter and with a smaller head like the one I have pictured. Just place the bracket in place and put supplied 2 bolts through tubes in front and put the shorter bolt with a smaller head toward motor through the tube. Be sure and use blue Loctite on shorter bolt at this point. Tighten all three bolts, when you have them tight remove the front two bolts and put the fender and fender support (with the two rubber things on it) in place and thread all four bolts in place. The two long ones you removed earlier and the two shorter ones that hold the fender in place. It was a piece of cake for me doing it this way, hope that all makes sense.
Sorry for the crooked pictures, they were straight before I uploaded them :crazy:
Oh yeah, I also went to the DMV this morning, boy I hate going to that place. I walked out with plates and the title is on its way! I was kinda expecting the great state of Illinois to charge me with a $1000 import tax or something but I guess they missed that one
|