bigger gas tank
anyone ever try a gy-5 tank on a gy-2 should be i think about a gallon bigger ,but hard to find specs . called lifan and they said it's a 3.2 gallon tank . i really don't think its that big . any gy-5 owner know how much it holds ? gy-2 is only 1.6
|
The GY5 tank is supposed to be 2.7 gallons. I haven't actually measured it but that's about right. I've ridden 250 km without fueling up.
Q |
|
OK i ordered a GY-5 tank 27.00 on ebay . guess i'll be the Guinea Pig for 27.00 bucks . Best i can tell should hold a extra gallon . i'll update as i figure it out .
|
My gy2 would have 2 gallons if completely empty.
I have an xr250 tank if you want me to measure it also. Allen |
Thanks katoranger . an xr looks like it could work . I'll have the GY-5 tank next week . I'll see how doable that is first . I also want to clean up the back of the bike . i think if i ditch the air filer box, I can move the battery off the side . Making a 12 month joy out of this ,Summer riding winter modding .
|
I had a dr350 tank on mine. It wasn't a very good fit, but worked.
The xr looks like a closer fit. Allen |
Quote:
Spud :) |
I guess when the Ebay site filled my order today ,they relized they had made a mistake the GY-5 tank is now listed at 45.00 . i payed 26.95 free shipping .
|
Quote:
Spud :) |
|
That was a very nice find, Racer. :) After it arrives, please let us know how well it fits.
Spud :) |
GY-5 Tank arrived today . Didn't have time for pics , I think it may work ,but it will not be as plug and play as i had hoped . i try and get pics up by tomorrow.
|
The GY-5 tank is going to require commitment . before i know if it will work ,I'll have to cut off the rear gy-2 mount off the frame . the front mounting of the gy-5 tank needs to be lower then where the gy-2 tank mounted . some not so good pics uphttp://viewmorepics.myspace.com/inde...ageID=62639392
|
I prefer the appearance of the original fuel tank. :D I think the stock fuel tank looks very good without the fuel tank plastic. However, you could also experiment with trimming the fuel tank plastic. ;) Personally, I would not cut away the stock fuel tank mounting hardware. ;)
Spud :) |
All times are GMT -4. The time now is 12:58 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.