TT250 Sprocket Recommendations
Hey everyone,
So I got my aftermarket exhaust, digital cluster, jetting and few other mods done. Bike runs great, tops out around 70. Anyone have some good sprocket recommendations so I can get a little more speed for highway riding. From what I've read the stock sprocket is 50T and a couple people tried at 47 with good results. Anyone know where I can get a good deal on a 47T sprocket that's TT250 compatible? |
steel: http://www.jtsprockets.com/catalogue/sprocket/JTR269
aluminum: http://shop.pbisprockets.com/product...&categoryId=17 right now I'm running a aluminum 46, but will probably go back to the 47 next time I have the rear wheel off. You may also find you do not pick up top speed, but that you'll do the same top speed, but with less revs... |
also, you can order aluminum from the PBI site. To get the steel JTR's use google/amazon.
|
This is what I used on our TT250.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 I haven't done a top speed run but it doesn't seem to lack. The 47 also left a trailable 1st gear. |
All times are GMT -4. The time now is 11:51 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.