ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Zongshen RX3 (http://www.chinariders.net/forumdisplay.php?f=136)
-   -   Rear carriers & luggage racks (http://www.chinariders.net/showthread.php?t=19318)

1cylinderwonder 06-11-2017 12:20 AM

Rear carriers & luggage racks
 
I need some help in locating an after market rear carrier or luggage rack for my stripped down RX3 that does not have a rear luggage or tail bag rack or plate to mount a soft or hard tail bag. I'm looking for a tail bag rack that will attach to existing mounting points on my RX3.
I'll be thankful for any suggestions. :yay:

DanKearney 06-11-2017 09:08 AM

I have the rear rack and panniers from my 2015 RX3 which I removed when I purchased the Tourfella set-up. I moved the trunk over to my TT250.

If you want the remaining rack and panniers you can have them for $50.00 plus the cost of shipping. There might be a few of the mounting bolts missing, but should be easily replaceable.

Cheers,

Dan K.

1cylinderwonder 06-11-2017 04:12 PM

Only need trunk mounting bracket
 
1 Attachment(s)
Quote:

Originally Posted by DanKearney (Post 258930)
I have the rear rack and panniers from my 2015 RX3 which I removed when I purchased the Tourfella set-up. I moved the trunk over to my TT250.
If you want the remaining rack and panniers you can have them for $50.00 plus the cost of shipping. There might be a few of the mounting bolts missing, but should be easily replaceable.
Cheers,
Dan K.

Dan,
It sounds like you transferred the parts I'm looking for to your TT250.
Thanks for the offer, but I'm only interested in the rear rack trunk mounting bracket. No need for panniers or side racks for panniers.
I want to only mount a rear top box or soft bag to a rear rack behind the passenger seat. Don't want to widen the width of the bike.
If I'm wrong, and you have and want to sell just the trunk mounting bracket, I'm interested. Attached photo of item similar to what I'm looking for.

1CW

DanKearney 06-12-2017 09:03 AM

No worries. Good luck.

Dan K.

jbfla 06-12-2017 09:37 AM

Can't you purchase one of the racks in the photo from CSC?

jb

1cylinderwonder 06-12-2017 12:17 PM

Quote:

Originally Posted by jbfla (Post 259042)
Can't you purchase one of the racks in the photo from CSC?
jb

jb,
You are correct. It's part number CSC-1105. :tup:
It was just kind of convoluted finding it on CSC's website. :hmm:
But, thanks for your help.

elevatorman 06-12-2017 02:17 PM

Will the rear rack from the RX3 also fit a Hawk 250.
The TT250 appears to have similar grab rails to the Hawk
and I'm wondering about using this on my Hawk.

SpudRider 06-12-2017 04:31 PM

Quote:

Originally Posted by elevatorman (Post 259066)
Will the rear rack from the RX3 also fit a Hawk 250.
The TT250 appears to have similar grab rails to the Hawk
and I'm wondering about using this on my Hawk.

I suggest you send a personal message to forum member 2LZ. He owns two RX3 bikes and a CSC TT250, so he should be able to compare the mounting points between the two models. ;)


All times are GMT -4. The time now is 09:12 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.