Yes, about to become my full-time home.

Any good ideas for putting something inbetween the pad and seat to add a little seat height? I'm trying to think of something that wouldn't slide around a bunch and would add like an inch or two

I'd try this: http://www.amazon.com/dp/B01DCVWIRG

I admit that I'm quite interested in that lifestyle. The hard part for me would be no shop.

How did you mount the canister. I can't see any holes that line up in the area of the picture.

Thanks, I should have known MotoCheez would have a video.

I forgot to update this when I drained the (factory) motor oil out of the forks and put 170ml (or was it 180ml, I forgot) of Maxima 10w fork oil in each of them. They firmed up nicely and no longer bottom out. Had I know spud recommend Mobile 1 ATF, I probably would have used it instead:

http://www.chinariders.net/showthrea...t=chart&page=2

Rear Brake Light Banjo Bolt Pressure Switch

http://www.ebay.com/itm/251717584893
http://i64.tinypic.com/97760w.jpg

And painted the trunk
http://i68.tinypic.com/2n7f7et.jpg
http://i67.tinypic.com/4hqq8z.jpg

I was just going to ask where to find a brake light switch and the one on the hawk is a cheap POS and mine is now totally broke. Thanks for the link!!

If you don't need one right away, China is a good option.... http://www.ebay.com/itm/New-Hydrauli...NTyI-e&vxp=mtr

Yes, if you don't mind the wait, you can get them for $6.56 less (basically 1/2 price) from China.

toy hauler/shop trailer pulled behind the motorhome

something like this should do nicely


http://1.bp.blogspot.com/-BAkA6HGC63...0/DSCN2697.JPG
https://s-media-cache-ak0.pinimg.com...f5ec0d3cd0.jpg

How hard was it to wire up the rear brake banjo pressure switch?