Confirmed Torque Specifications: Zongshen RX3
This thread contains a list of confirmed torque specifications for critical bolts of the Zongshen RX3 motorcycle. This thread is closed. Please contribute your confirmed torque specifications at the following thread. Thank you. :)
http://www.chinariders.net/showthread.php?t=15535 Lower Shock Linkage All bolts for the rocker/knuckle/arm, except the lower shock bolt: 38 foot-pounds All bolts for the link/dogbone: 38 foot-pounds Lower Shock Bolt: 33 foot-pounds Upper Shock Bolt 33 foot-pounds Swingarm Bolt 54 foot-pounds |
Rear Axle Bolt
50 foot-pounds |
Torque Specifications Taken from the AJP PR5 Owner's Manual
Oil Drain Plug, Oil Screen Plugs, Oil Filter Cover Oil Drain Plug: 18.5 foot pounds (25 Nm) Oil Screen Plugs: 18.5 foot pounds (25 Nm) Oil Filter Cover Bolts: 6 foot pounds (8 Nm) Cylinder Head Cylinder Bolts: 28 foot pounds (38 Nm) Triple Head Clamps Upper Triple Clamp: 15 foot pounds (20 Nm) Lower Triple Clamp: 9 foot pounds (12 Nm) |
Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual
Front Brake Caliper Bolt: 18 foot pounds (25 Nm) Engine Mount Bolts: 26 foot pounds (36 Nm) Crankcase Bolt: 7 foot-pounds (10 Nm) General Torque Specifications M4 Nuts & Bolts: 26 inch-pounds (3 Nm) M5 Nuts & Bolts: 53 inch-pounds (6 Nm) M6 Nuts & Bolts: 10 foot-pounds (7 Nm) M8 Nuts & Bolts: 18 foot-pounds (25 Nm) M10 Nuts & Bolts: 33 foot-pounds (45 Nm) |
Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual
http://i442.photobucket.com/albums/q...psnnikfilm.jpg Please note, the torques in this diagram are specified in newton-meters. The following link will convert newton-meters to foot-pounds. ;) http://www.convertunits.com/from/N+m/to/ft+lb |
All times are GMT -4. The time now is 12:55 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.