Vader 125 mods
5 Attachment(s)
Bought my Vader January of last year and have done quite a bit to it so far.
Engine/ performance - 141 cc big bore kit front tbolt, 16t front sprocket, custom made underbelly pipe made from stock pipe, vm26 mikuni carb with pod filter I've also installed a genuine Honda grom seat, eBay protaper metal mulisha bars, CNC brake/clutch controls, custom built fender delete and tag mount, also customized the rear luggage rack for a better look |
2 Attachment(s)
Couple more pics
|
Looks sharp!
|
Looking good! I really like the grom seat on there. Any issues fitting it?
|
I appreciate that guys ! No issues with fitting the grom seat except a couple tabs on the seat had to be trimmed down. I can take a couple pics to show you if you'd like to see what it takes to make it work
|
Nice looking bike. Is there a cat in the exhaust pipe?
|
Nice looking bike. :tup: If there's a cat in the exhaust pipe i would gut or remove. :)
|
Quote:
Quote:
|
Looks great! These little bikes interest me alot! What was the gains with the big bore kit? Costly? Anything else you care to share, please do. Not a whole lot of how to and mod threads on these.
|
Quote:
|
Quote:
|
1 Attachment(s)
Got the new otb chain adjusters for a Honda grom and they fit!! It's a huge upgrade over the stock chain tensioners on the Vader or any grom clone.
|
Also ordered a yoshimura exhaust and honda grom integrated tail light , still waiting on them to come in so more pics soon
|
Quote:
|
Quote:
|
1 Attachment(s)
Quote:
|
2 Attachment(s)
i have a grom exhaust, it will need some modification, heat it up and twisting look at my fotos
|
dude, that thing looks bad ass! Where did you get the chain adjusters? I installed Grom adjusters on my Hellcat but they really arent much better than the ones that came with it and they are really tight inside the swingarm. Did you install new brake rotors too?
|
Quote:
1. Groms Exhaust port is on a slightly different angle 2. The Studs on the Exhaust port are a different size Ive read somewhere else that you can use a NCC PIPE ADAPTER and change out the studs on the exhaust port to accept the full Honda Grom Exhaust setup in case anyone was interested. Disclaimer: I have not tried this myself but it seems like a feasible pretty cheap option to try before cutting things up. :tup: |
Do you happen to know the part number for the big bore kit you ordered from TBolt?
|
All times are GMT -4. The time now is 01:15 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.