150 gy6 crank seal
Anyone number t he part number for this seal.... or what model did HONDA call this?? as the parts people say... 150 gy6???? did not know honda made a GY6 motor... they are no help... newer parts people just know fuel injection models... and if it only a few years old... tried to match up at local bearing and seal places... see one on EBAY.. but 4 weeks away.. so if some one could give me info on this ... thanks
|
Honda didn't make the gy6. It's an amalgamation of different designs, if I remember correctly. What was the issue of matching it at a bearing supply place? Just measure with calipers and order.
|
http://atvscooterparts.com/pdf-ky/sc...25F-SA25AG.pdf had hints...
=== Anyways those kit are as https://img.alicdn.com/imgextra/i3/1...1758916155.jpg |
seal
ok.. thanks ... it is for a customer... he would like to get one NOW..... thats why I thought if some one knew the HONDA PART NUMBER... he could get it faster.... I told him to go to bearing shop.... so he phoned.... no they do not really help people on th e phione as much as if you go there... to cross it over... ok... thanks
|
Well, if you get measurements, they'll be able to find you something. The only one that might be difficult is the 2 19.8x30x5 seals (but they can still be found on Amazon). The other two are relatively common.
|
According to Taiwanese page https://forum.jorsindo.com/forum.php...=1&tid=2552776 Yamaha 93102-22843 are as 19.8*30*5 ***At ur own risk***
Nitrile (NBR) is the most common type is this application. Fluorocarbon (FKM) aka those "brown thingy" also available IF u tried HARD to find it at the right place... https://www.ptt.cc/bbs/biker/M.1460098893.A.AEB.html Intresting ?!!! SYM's infamous "brown" to "black" & endless failure ... |
All times are GMT -4. The time now is 02:08 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.