Will this carb fit the HAWK?
 

You'll likely need a flange adapter to bolt it to the engine head...

https://www.amazon.com/Mikuni-Rubber...XM3VKC4P61SEV9


Why not go for the Mikuni VM26 for $10 more on Amazon shipped free?

https://www.amazon.com/Mikuni-Carbur...&keywords=VM26

Yes, I have the Keihen PWK30 but does require an adapter. Check the link in my signature. I have a link in that thread for the adapter. The PWK 28 should work perfect on a stock Hawk.

I was thinking the grips, throttle etc were included however upon careful inspection...
They Are NOT....

The PZ30 pumper carb would be a better choice for the stock Hawk engine.
http://s.aliexpress.com/iMfmQZvA?fromSns=Copy

What’s the best carb for the hawk 250??

The VM26 is a good basic all around carb,easy to set up and find jets.

I have the PZ30 pumper carb and love it. Easier kick starts and better power of the line. You'll need the new short pilot jets on this one though.. I have a link if you decide to go that with that carb.

PE28 should be good - Taiwan company not a cheap copy etc
Direct fit like PZ30 series etc

anything thats not made in China


..