Replacement bulbs for instrument panel
 

Does anybody know what replacement bulbs will work for the Zong GY-2 200 Sierra?? The bulbs for the 3 panel lights (neutral, hi beam, & turn signal) and the speedo illumination lights are 12v, wedge base bulbs. One takes a 1.7w and the other a 3w. Not sure what size the base is though?

Eiko makes a 3w bulb with a T3.25 base...this looks like it would work for one of them.
http://www.elightbulbs.com/Eiko-4223...ive-Light-Bulb

If I can't find something then I'll have to order them thru Nestor.

Thx

My Zongshen 200GY-2 employs 194/168/912 size, wedge base bulbs for the instruments and indicator lights. :) Apparently, the T3.25 bulb is the same size. ;)

I have changed the the control lights on my bike. My Skyteam also had those 1.3W - 12v bulbs. I could barely see them during the day and I lost a cap too. So I put different lamp holders and 12V/DC 3W bulbs, which work fine. I bought them from a electronics Katalog.
Here is a video of it:
http://www.youtube.com/watch?v=fZszWAkf1Iw

I ordered a pack of 10 3w bulbs online so I'll give those a try.

@Trailbikeryder You've done a professional job with those little control lights, fantastic! :tup:

Get 'er done! :tup:

X2! :tup:

Thanks! :)



@Dahamaster
keep us posted

Trailbikeryder, the lights and panel look very good. Perhaps a small bit of silicone on the threads of the light covers would prevent them from unscrewing while you ride.

@Weld
good idea, Thanks for the tip. The front end does vibrate a lot.