Originally Posted by Azhule (Post 232038)

Sorry for all your problems with the bike... I remember being of "no help and kept getting reported for it" so I just stopped showing up to your threads... but feel free to PM me on "how cheap" I can get a Bashan parts bike :tup:

Originally Posted by Merlin (Post 232032)

Well Iam about done with this bike and this site! I now have a pile of metal that I have almost $2000 into that took me over three years to save for that is worthless. The lack of help is the main problem other then the crappy manufacturing with missing welds missing or broken parts crap wheels. (the list goes on) I had hoped this site would be helpful (NOT). I had hoped superiorpowersports.com would help (what a joke!!!) I posted in threads made my own threads posted PM's asking the simplest of stuff and been told to stuff it? I would never of bought this bike if I didnt think I could get help here (ya right).
So trusting in China bikes and trusting this site have been a major life mistake!!!??? Anyone want to buy a pile of crap cheep? >:(

PS it just snowed here so even if anyone cared enough to offer to help (I ant holding my breath) my riding season is over!>:(>:(>:(

Originally Posted by Ariel Red Hunter (Post 232044)

I am truly sorry to hear of your ongoing problems. I would have been glad to help you with your problems if I had known anything about your make of bike. But I don't. I know quite a bit about Hawk's, but that is because they are quite popular, and there is a lot of information on this site about them.

Originally Posted by Adjuster (Post 232043)

Merlin you are exactly the type of person a China bike is NOT meant for. There is nothing wrong with that at all. You need a new bike from the big names from a local dealer with a new bike warranty turn key and go. I know this has been frustrating for you. I hope you get it worked out in the end.


/

Originally Posted by Merlin (Post 232045)

Thanks a lot for trying to help! :thanks:

Originally Posted by Ariel Red Hunter (Post 232047)

Merlin, I just visited SuperiorPowerSports site and I could not find a bike called the "Blaze". Is that a Rocketa model?

Originally Posted by Merlin (Post 232049)

Say you know what would be FUN? To set this PILE ABLAZE!!! (LOL) Now I finale get the name!!!

Originally Posted by Ariel Red Hunter (Post 232050)

I think I found it. They are calling it the roketa Enduro 07k. That's if I'm right. I just also looked up Superiormotorsports customer satisfaction rating and it is abysmal.
I think this bike has the same engine/transmission as the Hawk (pushrod ohv), so we can help with that. You mentioned bad welding on the frame. Can you tell me more about that issue?

Originally Posted by Merlin (Post 232051)

Ya there is a major weld on the frame that is about 1/2 inch off so it welds NOTHING?!

Originally Posted by Ariel Red Hunter (Post 232052)

Ok, it's a half inch off - but a half inch off from what. Is there a loose piece that is supposed to be attached to it? I'm not trying to be difficult, Merlin, I want to help you as much as I can. Can you take a good picture of this weld, and put it on here? Maybe I could figure it out if I could see it.

Originally Posted by Merlin (Post 232055)

There is a piece of metal that is a reinforcement for the frame. Its where 2 frame tubes are butted together. The piece of metal was intended to be welded to the frame to hold it together but one side of it was not welded at all so that part of the frame is not welded. (just a miner detail wink) The weld goes along the tube but missed the metal reinforcement all together.