Need clutch!! 2005 terminator 200cc
 

Please help I have no idea where to buy parts for this bike. Are there other bikes some of the parts are interchangeable with. Or a parts Mfg I can get the parts from? New to Chinese bikes.

We need some pictures of what you have in order to help you ,generally China bikes are thrown together with generic parts ,so a picture of the engine will get the ball rolling .

Looks like a typical rebranded GY200 dirt bike, so it likely has a CG200/163FM engine.

The good news is, whole clutch assemblies are out there and cheap.

What we need to know is - how many plates in the stack and how many springs on the pressure plate for a start. So, no matter what, that right side engine cover needs to come off.

http://www.chinariders.net/showthread.php?t=14003 had good tips

Here's what I have
 

Here's a picture of the bike hope you can help

Gonna open it up after work today

Looks like a CB engine from the bits I can see. Clutch may be the same as a CG but I don't know for sure.

Super late reply
 

Was out town and moved around. Didn’t have time to work on the bike but here’s a pic of the clutch.

If you are feeling lucky you could order a clutch for a Lifan 163FML or any other CG engine and see if it fits. There are many potential small differences that could keep it from fitting but no way to tell without making lots of measurements. Looks the same on the outside.