Quote:
Originally Posted by MICRider
Quote:
Originally Posted by FastDoc
I respect the time and effort you put in to help others Spud. :wink:
|
+1! Excellent write up Spud!
|
Thank you, Stew.
Today I was working on my Honda XR650L; I installed a rebored cylinder and oversized piston. Therefore, I didn't get to ride the Zong today. However, I did ride the Zong yesterday, and the forks feel great! So far the Mobile1 Synthetic ATF is performing superbly as fork oil.
The '09 Honda, CRF150R, fork seal set I installed was exactly the same size as the original, Zongshen, fork seal set.
The Zongshen, fork oil seal had the following information printed on it:
JN 51103
37 50 11
This fork oil seal has an inside diameter of 37mm, an outside diameter of 50mm, and is 11mm thick.
The Zongshen dust wiper had the following information printed on it:
JN 51112
37 50.3 13
This dust wiper has an inside diameter of 37mm, an outside diameter of 50.3mm, and a width of 13mm.
The Honda, fork seal set, part #51490-GBF-J21, is identical to the original, Zongshen, fork seal set.
Spud