ChinaRiders Forums - View Single Post

FastDoc · 02-01-2012, 09:49 PM

I replaced the chain and sprockets today. The old parts were way past it. I used stock gearing and an X-Ring chain from Rocky Mountain ATV/MC. The whole kit was less than $100 and I like it.

The kickstand is in (Trailtech) and looks great. I just need to get some longer mounting bolts as the ones that came with it are too short due to a heel/frame guard that's in place and I want to keep.

I tried to repack the muffler but could not get it apart.

The end cap (FMF Turbine Core IV) has 3 allen screws. I removed them and could not get the core to come out or the end cap to come off. At the proximal end the outside is riveted on with about 6 rivets. Do I need to drill those out too?

I also got the fork seals but will defer that to Andy.

02-01-2012, 09:49 PM	#21
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	I replaced the chain and sprockets today. The old parts were way past it. I used stock gearing and an X-Ring chain from Rocky Mountain ATV/MC. The whole kit was less than $100 and I like it. The kickstand is in (Trailtech) and looks great. I just need to get some longer mounting bolts as the ones that came with it are too short due to a heel/frame guard that's in place and I want to keep. I tried to repack the muffler but could not get it apart. The end cap (FMF Turbine Core IV) has 3 allen screws. I removed them and could not get the core to come out or the end cap to come off. At the proximal end the outside is riveted on with about 6 rivets. Do I need to drill those out too? I also got the fork seals but will defer that to Andy. __________________ Happy to serve.
	0