Quote:
Originally Posted by SpudRider
I continue to like FastDoc's idea of employing "summer" and "winter" fenders. Instead of installing some type of velcro "bra" to the oil cooler in colder weather, I could just install the "winter" fender which lacks the air holes.
Speaking of oil cooler "bras," what is a good material for this purpose? My oil cooler is a 4-inch square. Therefore, if I had a rectangular piece of material 4" wide by 10-1/2" long, I could secure this material around the oil cooler with a velcro strip.
I thought about installing a Jagg oil bypass, but my hose lines are too short to accommodate one of these units.
http://www.jagg.com/by-pass.htm
Spud
|
If you don't ride below freezing, I can't see that a cooler bypass would be necessary. Automatic transmissions have an automatic bypass valve for that purpose, but it doesn't activate until it's really cold out.