[SpudRider]

My UFO rear fender had an LED brake light as well as a tail light. However, the the previous owner had not wired the brake light. Therefore, I bought a Tusk Hydraulic Brake Switch for Nissin brakes.

http://www.rockymountainatvmc.com/p/...+nissin+brakes



I installed the switch on my rear master cylinder, and routed the wires along the subframe a safe distance from the exhaust pipe.



I wired the switch into the brake light wire coming from the rear fender, and everything works great! The brake light is very bright, even in daylight.

Spud