[SpudRider]

Okay. Click the following link to download the Zongshen 200GY-2 Service Manual.

http://www.chinariders.net/transfer/...ice_Manual.pdf

Page 132 of the service manual contains the wiring diagram for the CDI-ZS067-001, AC-CDI unit. The green/white and blue/yellow wires come from the pickup coil/pulse generator, and should connect to the wiring harness in a small boot near the carburetor. You can test the connections there, or you can locate the green/white and blue/yellow wires at the connector which plugs into the CDI unit.

Set your digital multimeter to read AC voltage. Place one probe on each of the two wires, it doesn't matter which one. With the transmission in neutral, crank the engine, and see if you get pulses of AC voltage coming from the pickup coil/pulse generator. If you do, you have confirmed your bike employs an AC-CDI unit.

All of the AC-CDI units cost about 100 Yuan, after you add local shipping. Here are links to a few of the CDI-ZS067-001, AC-CDI units.

http://item.taobao.com/item.htm?spm=...id=18041577178

http://item.taobao.com/item.htm?spm=...id=20011311269

http://item.taobao.com/item.htm?spm=...&id=6110384132

http://item.taobao.com/item.htm?spm=...&id=6320155790

Here is the same, AC-CDI unit, which is being sold on Alibaba.

http://www.alibaba.com/product-gs/28..._LY200_AC.html

Spud