Quote:
Originally Posted by Weldangrind
Do these look right? I don't think I have a brake pedal, although I can look further if you need. The bolt holes on these brackets are about 3" apart center to center.
 |
Thanks Weld! They are very close, but the mount for the 'peg' is centered between the bolt holes, meaning they are higher off the ground. The standard brake would not work being lower than the center of the holes.In the photo of the rear cylinder there is a silver allen bolt that is used for the pedal assembly. I certainly appreciate your time for the research. I 'inherited' several junk 50cc scooters. The rear passenger collapsable pegs are the same. It wont take much to cut and them to weld a flat plate, my laziness and lack of time gets in the way sometimes.